Re: [foxboro] BOUT Block
- From: Brian Long <blong@xxxxxxx>
- To: "<foxboro@xxxxxxxxxxxxx>" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 10 Jul 2012 19:08:05 -0500
IN parameter in auto
Sent from my iPhone
On Jul 10, 2012, at 5:47 PM, "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx> wrote:
> Brian,
>
> Are you writing to the IN (if Auto) or the COUT (if Manual) parameter?
>
> Joseph M. Riccardi
>
> 386-441-0250 Office
> 386-451-7607 Cell
>
> Joe@xxxxxxxxxxxxx
>
> "To give real service you must add something that cannot be bought or
> measured with money; and that is sincerity and integrity." - Donald A. Adams
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
> Behalf Of Brian Long
> Sent: Tuesday, July 10, 2012 5:01 PM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] BOUT Block
>
> We have noticed an issue where a BOUT block set by an operator display using
> FoxView, stays SET, does not go back to 0. We are using FoxView momentary
> contact function, pulse type timed and option pulse to 1, then set to 0.
> Anyone else seen this, we are at FV 10.2.1. We were able to duplicate the
> issue.
>
>
> Thanks in Advance,
>
> Brian Long
>
> Arkansas Kraft
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at your
> own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
