Not a problem with the right AIN parameters; from memory SCI=1, and HSCO1 and/or KSCALE=2... Joseph M. Riccardi 386-441-0250 Home Office 386-451-7607 Florida Cell 440-725-4025 Ohio Cell Joe@xxxxxxxxxxxxx "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Entoro Wijaya Sent: Sunday, April 03, 2011 10:31 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] 0-10 mA Hi All, I'm trying to measure device that used 0-10 mA output with 0-20 mA FBM. beside using converter, any suggestions on how to do it. Thanks in advance. Regards, Entoro Wijaya _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave