[foxboro] dmcmd trend with -descr
- From: Yolanda Dickerson <Yolanda_Dickerson@xxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 5 Oct 2011 11:41:06 -0500
To all,
Is there a command to show the description of the block which is on the
trend pen on a FoxView display . My example is below
dmcmd trend -line 1 -g trend 1 -descr "dd" is the command but I can't get
it the show anything on the FoxView graphic.
I search the Fox doc (B0193DF-M) and invensys website but good example of
how to use the -descr .
Yo
FoxView rev 10.2.2
Mesh: I/A 8.4.3
Hist: Aim
Yo Dickerson
DCS Technician
Phone: (409) 723-3518
Pager: (409) 726-4281
Email: yolanda_dickerson@xxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] dmcmd trend with -descr - Yolanda Dickerson
