We have an existing 7.1.1 Unix Nodebus network that has a Foxboro solution = GPS time sync that produces a sequence of event point and a time sync = program running on one of our AW's that updates the master time keeper. = We are planning on installing a new version 8 mesh network with ATS's back = to our old Nodebus network and are planning on installing the new time = sync solution as described in the B0700AQ Time Synchronization User's = Guide for the version 8 mesh side. Will the new time sync solution update = the time over the ATS's to the Nodebus network as well or do we need to = keep both time sync clocks in place? Thanks, Jim Kahlden System Reliability Analyst Lower Colorado River Authority Fayette Power Project 6549 Power Plant Road La Grange, TX 78945 (979) 249-8514 (Ph) (979) 249-8390 (Fax) jim.kahlden@xxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave