[foxboro] R: FoxView momentary contact and close problem - solution
- From: "Crivellotto, Davide" <Davide.Crivellotto@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 24 Jan 2007 04:06:33 -0500
Alex,
you could say it was half a mistake.
Some time ago you suggested to rename omsetimp to omset, and omgetimp to
omget...
So, it was not completely wrong :)
Regards
Davide
-----Messaggio originale-----
Da: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
Per conto di Johnson, Alex P (IPS)
Inviato: Tuesday, January 23, 2007 11:17 PM
A: foxboro@xxxxxxxxxxxxx
Oggetto: Re: [foxboro] FoxView momentary contact and close problem -
solution
I meant to type omsetimp. Sigh...
That's what I get for answering questions while in a meeting. :)
Regards,
=3D20
Alex Johnson
Invensys Systems, Inc.
10900 Equity Drive
Houston, TX 77041
713.329.8472 (voice)
713.329.1700 (fax)
713.329.1600 (switchboard)
alex.johnson@xxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of David Johnson
Sent: Tuesday, January 23, 2007 9:09 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FoxView momentary contact and close problem -
solution
Yeah, I knew you could do that, but then you have another file to=3D20
keep up with, move between various WPs, etc. If you can live with a=3D20
1 or 2 second sleep it's cleaner to use dm scripting.
But I didn't know that omset (and shouldn't that be omsetimp, I mean=3D20
you always get onto me for that), would do multiple sets on one line=3D20
like that. But I tested it, and sure enough it works very well.
Hope you're doing well.
Regards,
David
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20
Confidentiality Notice: =3D0AThe information contained in this electronic
m=3D
essage and any attachment(s) to this message are intended for the
exclusi=3D
ve use of the recipient(s) and may contain confidential, privileged or
pr=3D
oprietary information. If you are not the intended recipient, please
noti=3D
fy the sender immediately, delete all copies of this message and any
atta=3D
chment(s). Any other use of the E-Mail by you is prohibited.=3D0A
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
Confidentiality Notice: =0AThe information contained in this electronic m=
essage and any attachment(s) to this message are intended for the exclusi=
ve use of the recipient(s) and may contain confidential, privileged or pr=
oprietary information. If you are not the intended recipient, please noti=
fy the sender immediately, delete all copies of this message and any atta=
chment(s). Any other use of the E-Mail by you is prohibited.=0A
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] R: FoxView momentary contact and close problem - solution
