We are testing an HHT50 running PC20 and are not able to communicate to transmitters connected to the IA with FoxCom, (FBM39). This is a known issue and the fix is to adjust the settings in the .INI file. Unfortunately we have not been able to find settings that work. The default settings are as follows: gapTime.FoxCom.ia=14 receiveTime.FoxCom.ia=20 delayTime.FoxCom.ia=300 waitTime.FoxCom.ia=300 Just wondered if anyone out there has taken the time to figure out what the settings or tricks might be for a "New" PC running XP with PC20. Thanks in Advance, Brian Long Arkansas Kraft _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave