Gentlemen, I am trying to configure alarms from a PAKIN block. Have tried several different types of blocks with no success. Ideally would like to take the BIT to a CIN block, but does not look like it will work. Any ideas on an easy, down and dirty way to grab one BIT from a PAKIN to set an alarm. Thanks in advance, Troy L. Brazell Duke Energy Field Services Sr. Process Control Analyst ISA CCST Phone (405) 263 4130 Cell (405) 301 2994 Okarche Plant Route 3 Box 95 Okarche, OK. 73762 ***************************** MS Windoze the cure for Insomnia ***************************** _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave