[foxboro] NuTCRACKER fatal error "Cannot find PIPE Error (2)
- From: Bryan Terry <terry.bryan@xxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Tue, 17 Dec 2013 14:30:31 -0800
Hello All,
Has anyone seen this error on reboot of an NT machine running I/A Series
6.4 upon startup?
"NuTCRACKER fatal error "Cannot find PIPE Error (2)'
followed by:
Service Control Manger "At least one service or device failed during system
startup. Use Event Viewer to examine the event log for details"
From the Event log:
"The Fox Monitor service depends on the NuTCRACKER Kernel service which
failed to start because of the following error: The process terminated
unexpectedly."
FoxView does not open and cannot be run manually. I tried re-installing
FoxView 8.0 and the problem persists.
Any suggestions would be greatly appreciated.
Thank you,
Bryan
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
