[foxboro] Mounting Foxboro marshalling cabinets on a raised computer floor
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 24 Jan 2011 23:19:13 -0500
Folks,
We are just finalizing design for mounting Foxboro marshalling cabinets on a
raised computer floor. A how to question surfaced about mounting the
enclosure just to the raised computer floor or through the raised computer
floor to the subfloor floor below using threaded rod. The latter is
certainly a more secure mounting method. Why not?
Joseph M. Riccardi
386-441-0250 Home Office
386-451-7607 Florida Cell
440-725-4025 Ohio Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Mounting Foxboro marshalling cabinets on a raised computer floor - Joseph M. Riccardi
