All Knowing List, On this subject I am: "1st time caller, long time listener" David Johnson: If you want my vote for President this year solve this problem;<) Yes, Hawaiians can vote for president, (even transplanted Hawaiians like me) Alex Johnson: Even though I'm sure to get an away message from you informing me that you are currently in Lower Slobovia, with limited email access, I know you will have read this within seconds of my sending so consider this a challenge between you and your brother David mentioned above to see who answers first. I am trying to use iccdrvr.tsk to load FCP002 on a training system. I am able to enter and exit FCP002 using the ICC graphical interface. I have been sure not to be in ICC for FCP002 when trying to run iccdrvr.tsk From the Korn Shell, (at least I think I am in KORN shell, How do I verify?), I issue the following command on the command line: $ iccdrvr.tsk -i 2FFP02.txt 2FFP02.txt is being used as my input file and the first few lines look like this: OPEN FCP002 ALL TJV ADD = FLA_D1133 TYPE = COMPND DESCRP = IA COMPOUND The following error is echoed to the screen: ECHO 1 OPEN FCP002 ALL TJV FAIL 1 OPEN FCP002!: Thu Dec 20 08:07:38 2007 -14 ICCopen error: class= 1 error= -1000 text= icConnectCp: error on cs_reg_exit FLSH 2 ADD = FLA_D1133 FLSH 3 TYPE = COMPND FLSH 4 DESCRP = IA COMPOUND So the problem appears to be that iccdrvr.tsk is unable to open FCP002 but I don't know why. Any ideas or suggestions? Mele Kalikimaka, Tom VandeWater Control Conversions Inc. Tesoro Hawaii Project Manager _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave