Hey ya'll We are using IALink (from IABatch) to bring some values into a recipe. The values that the recipe tests against are very small 0.1 is a lot different than 0.2 . It appears that we are having problems because the change delta is too large. (We can't prove this, but the symptoms are consistent with this and a CP to CP communication problem.) We are not sure if or where the change delta is set for this program. Any help would be appreciated. Something funny for you cube dwellers out there. http://www.cubenews1.com So have fun. But answer my question OK. Regards, David _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave