[foxboro] GCIO on P91
- From: "Heath, Graham" <graham.heath@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 25 Jan 2007 06:10:52 -0500
We have a test system here and have managed to get the Annunciator
working, the only issue that the Techie had was that the GCIO COMMS.
port defaulted to 1 in sysdef and he had plugged it into the wrong port.
Regards
Graham Heath
Systems Engineer
.Invensys Process Systems Ltd.
graham.heath@xxxxxxxxxxxxxxxx
Confidentiality Notice:
The information contained in this electronic message and any attachment(s) to
this message are intended for the exclusive use of the recipient(s) and may
contain confidential, privileged or proprietary information. If you are not the
intended recipient, please notify the sender immediately, delete all copies of
this message and any attachment(s). Any other use of the E-Mail by you is
prohibited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
