Hi List, I've asked this before I think, but i can't find it in the archive.... We're still using AW/WP51's and DM for our operator stations (on a 8.4.2 mesh system). I have a couple of displays which open very slowly. I can see some objects immediately, after 15-20 sec's the rest of the objects appear. This happens on every WP, AW and on Xceed. Always the same displays. Occasionally they open very fast, but usually they're very slow. I've checked for non existing tag links etc, but all the links exist and function fine. I've optimized the displays, used pfdpack on them, tried deleting the embedded scripts etc, tried stripping down the display to see if it opens faster with less objects, but they're still very slow. Once open, the update time for the values is OK. I can rule out hardware, cause it happens on all stations, other displays which are even more object - crowded open fine. It has to be something related to these specific displays Anyone have any idea's? thanks & Rgds, Dirk _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave