[foxboro] Cable and switch block settings for INT30 <-> 1770-KFC
- From: "Kevin Fitzgerrell" <fitzgerrell@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 3 Oct 2008 12:29:33 +0900
Hi all,
For those of you using INT30s with KFCs, which Foxboro cables are you
using between the switch block (P0970VB) and the KFC? We've been
buying the P0970XE (serial 25FD to 15MD) that we use for our KEs, and
replacing the 15MD with a 25FD. This seems a little complicated if we
can use the standard P0970XD (serial 25FD to 25FD).
Also, does anyone have switch block (P0970VB) settings for fault
connection from AB30s to KFCs? I'd guess it'd be the same as for the
KFL...
Cheers,
Kevin FitzGerrell
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Cable and switch block settings for INT30 <-> 1770-KFC
