[foxboro] CHARC block BCALCO generation
- From: Corey R Clingo <corey.clingo@xxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Tue, 21 Mar 2006 11:32:23 -0500
Hi list,
I noticed while troubleshooting some control logic the other day that
CHARC blocks will not continuously update the BCALCO parameter when PRIBLK
is not 1. Unfortunately in the scheme we're using I cannot set PRIBLK to
1 as there is not always an upstream propagation path for it.
Is this as-designed behavior? I don't believe I've noticed this
phenomenon on other blocks, but I plan to experiment if I get time. I
took a quick look at the docs, but they don't explicitly mention this.
Thanks,
Corey Clingo
BASF Corp.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] CHARC block BCALCO generation
