Hi WIssam, I have followed all the steps, given by you. But I have installed Exchange 5.0 instead of 5.5 as I had the Exchange 5.0 at the time when server crashed. The backup is of the Information store of Exchange 5.0 only. In the end, it gives Error 4015 connecting to the microsoft exchange server directory service Unable to initialize the microsoft exchange Information Store service. Error 4015 Pls. advise.. Regards, Chand Deshwal (M.Tech CS&E, MCSE, CCNA) Network Administrator Kampsax India Ltd., Gurgaon ph: +91 124 6348259-62, Extn. 712 chand@xxxxxxxxxxxxxxxxx <mailto:chand@xxxxxxxxxxxxxxxxx> http://www.kampsaxindia.com <http://www.kampsaxindia.com/> -----Original Message----- From: Wehbe, Wissam [mailto:Wissam.Wehbe@xxxxxxxxxx] Sent: Thursday, February 07, 2002 4:04 PM To: [ExchangeList] Subject: [exchangelist] RE: Exchange Disaster Recovery - Help Required http://www.MSExchange.org/ Great, I did this exercise three times and you can make it. Please follow the steps below, don't leave any one of them, this is what I did and it will work. Recovery Steps * Manually remove Exchange completely from the computer. To do this, follow these steps: In HKEY_LOCAL_MACHINE \CurrentControlSet \Services, remove all keys relating to Exchange 2000 services and drivers from the registry. These include: * DAVEX * ESE97 * ESE98 * EXIFS * ExIPC * EXOLEDB * IMAP4Svc * MSSEARCH * POP3Svc * RESvc * Anything that starts with LME- * Anything that starts with MSExchange * Anything that starts with SERVERNAME-LME * Remove the Exchange Setup key from the HKEY_LOCAL_MACHINE \Software \Microsoft \Exchange registry key entirely. * Rename the Exchsrvr folders on all disks on the computer. * Restart the server. * Delete the renamed Exchsrvr folders from the system. * From the Exchange Server 5.5 installation compact disc, run setup /r. Choose the same installation choices that were on the original server. Choose to create a new site with the same organization and site names. * When Setup finishes, run Performance Optimizer, and configure the file locations to the same places in which the files were located before. * From the appropriate Exchange Server 5.5 service pack compact disc, run update /r. * Install any post-service pack hotfixes that were previously on the server. * Restore the directory and information store from a previous backup. * Start the Exchange Services * Force intrasite directory replication. and enjoy your Exchange again :)) Regards Wissam From: Deshwal Chand [mailto:chand@xxxxxxxxxxxxxxxxx] Sent: 07 February 2002 12:42 PM To: [ExchangeList] Subject: [exchangelist] RE: Exchange Disaster Recovery - Help Required http://www.MSExchange.org/ Hi WIssam, Thanx for the response. Yes, I have the directory database as well. But I was trying to recover only the Information Store as I do need only few mailboxes. Regards, Chand Deshwal (M.Tech CS&E, MCSE, CCNA) Network Administrator Kampsax India Ltd., Gurgaon ph: +91 124 6348259-62, Extn. 712 chand@xxxxxxxxxxxxxxxxx <mailto:chand@xxxxxxxxxxxxxxxxx> http://www.kampsaxindia.com <http://www.kampsaxindia.com/> -----Original Message----- From: Wehbe, Wissam [mailto:Wissam.Wehbe@xxxxxxxxxx] Sent: Thursday, February 07, 2002 3:08 PM To: [ExchangeList] Subject: [exchangelist] RE: Exchange Disaster Recovery - Help Required http://www.MSExchange.org/ Did you get the directory Database WIssam -----Original Message----- From: Deshwal Chand [mailto:chand@xxxxxxxxxxxxxxxxx] Sent: 07 February 2002 10:19 AM To: [ExchangeList] Subject: FW: Exchange Disaster Recovery - Help Required Importance: High HI, I have a really tough job at hands. S C E N A R I O We had Exchange 5.0, installed at a WindowsNT Server 4.0 with service pack 5 installed. The Information and Directory store were on one partition of the disk and the logs were on other partition. The hard disk failed. Unfortunately, there was no backup taken for 10 days. (No backup at all!). Somehow, it was managed that the PRIV.EDB and PUB.EDB could be retrieved from the crashed hard drive. Only these two files were managed to be retrieved. PRIV.EDB is 3 GB of size and PUB.EDB is 1 MB in size. But the person at that time were not able to get it working. I have been trying to restore the same. What I have done? 1. Installed NT 4.0 with service pack 5 at some other machine (NT server as PDC for some test domain) 2. Installed Exchange 5.0 on the machine. 3. Stopped the Information Store service of Exchange and copied the PRIV.EDB abd PUB.EDB file into the MDBDATA directory. In the MDBDATA directory only these two files were left. All the logs were deleted. 4. Changed to exchsrvr\bin directory and ran ISINTEG -PATCH . This gives a warning: Warning, The Private Information Store could not be found. Assuming -Public -Only Now if I try to run the information store service, it terminates with the sevrice specific error: 4294966095, which is described as -1201 0xFFFFFB4F JET_errDatabaseDuplicate Database already exists 4294966095 in Microsoft references. If I try to run "edbutil /d /r /ispriv /tx:\tempdfg.edb, then says, operation terminated with error: 550. edbutil /d /r /ispub /tx:\tempdfg.edb runs successfully. I have found out the state of the PRIV.EDB. It is in the Inconsistent State. I have no way now. Could any of you guys help me! Regards, Chand Deshwal (M.Tech CS&E, MCSE, CCNA) Network Administrator Kampsax India Ltd., Gurgaon ph: +91 124 6348259-62, Extn. 712 chand@xxxxxxxxxxxxxxxxx <mailto:chand@xxxxxxxxxxxxxxxxx> http://www.kampsaxindia.com <http://www.kampsaxindia.com/> ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: chand@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: WISSAM.WEHBE@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: chand@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')