|
It’s the public one. Trying to
troubleshoot extremely slow backups only getting like 70mbs \min. Our Exchange
03 gets up to 2GB on same LAN this is on auto as well though. Verified Binding settings to
ensure public is at top Verified that heartbeat NIC is
set to internal cluster communications. I’ll give that a shot on the
port side and set to 100full. I’m also going to disable the “HP insight NIC
agent” service to test although it’s not doing any teaming. Thanks; James From:
exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On
Behalf Of Wright, Steve Also, if you want to have the
nic at 100/Full why don’t you try setting the switch port to 100/full and
leaving the Nic setting on Auto? Have you tried that yet? From:
exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On
Behalf Of James Chong Anybody have any ideas as to why my cluster does not want to
start the IS Stores when the NIC is set to 100Full? Tried today; doesn’t want
to start; all basic resources start cluster name; IP; NIC etc. System Attendant
starts but not IS. Once I change back to Auto starts right up. Thanks James Chong 11130 Sunrise Valley Dr. Reston, VA 20191 |
