[ExchangeList] Re: [ActiveDir] Change private IP on a cluster

  • From: "Jose Medeiros" <josemedeiros@xxxxxxxxxxx>
  • To: <ActiveDir@xxxxxxxxxxxxxxxxxx>, <exchangelist@xxxxxxxxxxxxx>
  • Date: Sun, 4 Jun 2006 21:53:25 -0700

Hi Mike, 

I've only had to change a SQL 2000 Active / Active Cluster IP and it involves 
some additional steps for SQL Virtual Names. It's been over 5 years since I 
built an Exchange 2000 cluster, but I do not recall if Exchange has any 
dependencies (I would probably post this to the Exchange list and I am cc'ing 
them as well)

Take a look at : 
Exchange Server 2003 Cluster Configuration Checklist
http://www.microsoft.com/technet/itsolutions/msit/operations/exchclustercklist.mspx?pf=true

Changing the IP address of network adapters in cluster server
http://support.microsoft.com/kb/230356/EN-US/

Or in PDF format at: 
http://www.maned.com/support/knowledge_base/Roundhouse/Recommended_Reading/Q230356.pdf

Also just in case you ever have to change it on a SQL:

How to change the network IP addresses of SQL Server virtual servers
http://support.microsoft.com/kb/244980/en-us 

Hope this helps, 

Sincerely,
Jose Medeiros
MCP+I, MCSE, NT4 MCT
408-765-0437 Direct
408-449-6621 Cell

--------------------------------------------------------------------------------------------

----- Original Message ----- 
From: "Mike Newell" <mike.newell@xxxxxxxxxxxx>
To: <ActiveDir@xxxxxxxxxxxxxxxxxx>
Sent: Sunday, June 04, 2006 12:53 PM
Subject: [ActiveDir] Change private IP on a cluster


Doh! Didn't mean to let this go without the OT:. Sorry.

________________________________

From: ActiveDir-owner@xxxxxxxxxxxxxxxxxx on behalf of Mike Newell
Sent: Sun 6/4/2006 11:40 AM
To: ActiveDir@xxxxxxxxxxxxxxxxxx
Subject: [ActiveDir] Change private IP on a cluster


Hey,
I have an Exchange 2003 active/passive cluster on Windows 2003 and I need
to change the private ip on both nodes. I realize that while I'm
changing the IP the nodes will not talk to each other and likely kick
the passive node off or stop the cluster service for a few minutes on
the passive node.

Is there anything else I will need to do or look out for? I don't
*think* this is a big deal but since it's a production cluster, and I've
never had to do this, I thought I would check before I tried it.

Thanks again.

Mike.

Other related posts:

  • » [ExchangeList] Re: [ActiveDir] Change private IP on a cluster