Laurence,
I have a hand-held circular saw, but it is not very good - rough cuts
only. However, if the pieces are less than 4ft (1.4m), then I am happy
to cut them on my bench saw (which being in my cellar workshop has
limited width) - if you mark them up and bring them round. Are they for
alcoves? if so, should be short enough - but something I have been
caught out with in the past - quite often the walls are not square and
the back and front are different widths.
Cheers,
Gordon @ 31 Rossington.
On 24/06/2020 11:42, Patrick Duce wrote:
Hi Laurence - I've just done the same as you - but used my handsaw in the end.
ECCO Tools List is here: https://onedrive.live.com/edit.aspx?resid=D1456270EC869800!143&ithint=file%2cdocx&authkey=!AO--kP57DhUcqh0
Patrick
------------------------------------------------------------------------
*From:* eccotalk-bounce@xxxxxxxxxxxxx <eccotalk-bounce@xxxxxxxxxxxxx> on behalf of L Alexander <dmarc-noreply@xxxxxxxxxxxxx>
*Sent:* 24 June 2020 09:04
*To:* ECCO Talk <eccotalk@xxxxxxxxxxxxx>
*Subject:* [eccotalk] Electric saw
Hi
Does anyone have an electric saw I could borrow? I've had some wood delivered for shelves for our alcoves but they aren't quite the right size and I need to cut a few centimetres off if anyone can help. I have 12 to do so would be better if I don't have to do them all manually.
best
Laurence
