[eagleengineering] Re: New rule Clarification changes our plans?
- From: "Karen Hillblom" <KandNplace@xxxxxxxxxxxxxxxx>
- To: <eagleengineering@xxxxxxxxxxxxx>
- Date: Mon, 6 Feb 2006 14:25:00 -0800
we just have to keep it inside the robot like we were talking about on Sun
the only thing we will have to do is raise and reinfoce the front
----- Original Message -----
From: Jim Molenda
To: 'Connolly, Art' ; 'Morgan, Wayne' ; 'J. Ray Mitchell Jr.'
Cc: 'Nancy McIntyre' ; eagleengineering@xxxxxxxxxxxxx
Sent: Monday, February 06, 2006 12:57 PM
Subject: [eagleengineering] New rule Clarification changes our plans?
See this link:
http://www.chiefdelphi.com/forums/showthread.php?threadid=43369
<S03> The SHOOTING MECHANISM must remain inside the ROBOT - Any mechanism
used to throw balls
must be contained within the original 28" x 38" x 60"starting envelope of the
ROBOT and must be
shielded such that the mechanism cannot make contact with other ROBOTs. A
ROBOT that violates this
rule will be considered unsafe per <S01>.
This now includes a "roller" type sweeper such as ours and it must be
shielded per S03.
J
Other related posts:
