[duxuser] Re: Having Problems with 10.5
- From: Steve Dresser <s.dresser@xxxxxxxxxxx>
- To: duxuser@xxxxxxxxxxxxx
- Date: Mon, 27 Sep 2004 13:24:46 -0400
Ray,
Try changing the right margin on the embosser to 44 or 45. If you're only
losing one character, 44 will work. If you're losing two characters, 45
should do the trick. Good luck.
Steve
On Monday 9/27/2004 12:23 Ray E. Campbell, DCIL wrote:
Hi All:
I have installed Duxbury Version 10.5. I'm having a problem. We use a
Enabling Juliet Pro Braille Embosser here at the center and I've got the
embosser set up as follows:
Left Margin: 3
Right Margin: 42
This allows for 40 characters per line on 11 inch wide paper.
IN the Embosser setup for the document I'm trying to Braille, I have:
Brailler Device: Enabling Juliet Pro
Desired Characters per Line: 40
Desired Lines per Page: 25
Top Margin: 1
Binding Margin: 2
I've also got the escape codes option in the device settings tab for the
Juliet Pro unchecked.
Here's my problem. On the odd numbered pages, the lines appear to print
correctly. On the even numbered pages, I lose one or two characters at
the end of each line. Has anyone else had this problem and how have you
solved it?
Thanks,
Ray Campbell, Independent Living Skills Coordinator for Visual Services
DuPage Center for Independent Living
630-469-2300, Ext. 12 (V), 630-469-2606 (F)
<mailto:ray_dupagecil@xxxxxxxxxxxxx>ray_dupagecil@xxxxxxxxxxxxx
If you're not registered to vote, let me know and I will help you
register. All of us MUST REGISTER by October 5 and then GET OUT AND VOTE
November 2.
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
