Hi, I hope someone can please help me. I am using DBT10.6 and Microsoft Word.I have a large BRF file. I need a portion of it in print as a microsoft word file.
I have opened DBT, Have opened my BRF file which has opened into a DXB file.Next I have cut and pasted the required paragraphs out of that file and into a new DXB file.
I then translated the new DXB file using CTRL-T and got a properly formatted DXP file.
I now need to save this in such a way that it can be read by Microsoft Word.I have looked at the Save As options but am not sure what (if any) of these I should be using.
I have also tried to cut and paste the DXP file into a blank word file but the result requires considerable cleaning up and is not appropriate unless there is no other way.
any help will be appreciated- I'm certain there must be a more satisfactory way of doing this but I cannot work it out.
Regards and thanks Christine . Christine Simpson Information Alternatives 22 Beaton Street Euroa VIC 3666 Tel: 61 3 5795 2307 Fax: 61 3 5795 2969 Email: cms.infoalt@xxxxxxxxxxx