[ddots-l] Re: sonar 5 and ct 4
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 16 Mar 2006 18:00:32 -0000
Hi Paul!!
Installing Sonar 5 wont corrupt your CT installation. Meaning that, if you
install Sonar 5, CT and
Sonar 4 will be fine as CT only modifies registry entries in Sonar 4's registry.
Regarding installing Victor's free scripts well, I would personally run them
under a separate
version of Jaws. That way, you can say use Jaws 6.2 with CT and Sonar 4 and
Jaws 7 with the free
scripts and Sonar 5. I would not attempt to use the free scripts and CT with
the same version of
Jaws as they both need access to the executable that is used in order to run
Sonar. That's why, if
you have Sonar 4 and 5 installed, CT will run when you open Sonar.
If you really must run the free scripts and CT with the same version of Jaws
then, in order to run
the free scripts, you would need to cut the CT scripts to a separate folder
before using the free
ones with Sonar 5 and vice versa. I wouldn't recommend that though.
Regards, Phil Muir
P J Muir Productions
www.philmuir.com/
----- Original Message -----
From: "Paul Erkens" <pje@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, March 16, 2006 5:30 PM
Subject: [ddots-l] sonar 5 and ct 4
> Hi Gord,
>
> I'm curious to take a look at Sonar 5, yet I have Sonar 4 and ct installed.
> If I installed Sonar 5
> to investigate some of the new features, would that somehow corrupt the ct4
> installation? I know
> ct4 has not been designed for Sonar 5 so I'm not expecting ct to work in
> Sonar 5 of course, but
> will the fact that ct is installed have any effect on Sonar 5? Can I install
> Victor Tsaran's free
> scripts for Sonar 5 next to the ones for Sonar 4 from Dancing Dots?
>
> Paul.
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:-
> faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
