[ddots-l] Re: sonar 4 and vsts
- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 25 Apr 2005 09:25:53 -0400
KEvin:
Here is a point that confuses a lot of folks. In order to see the
parameters of a soft synth in the track inspector, you must insert it
directly into an audio track, not into the synth rack.
Gord
----- Original Message -----
From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 24, 2005 1:32 PM
Subject: [ddots-l] Re: sonar 4 and vsts
Phil,
I figured it was the effects tab but I couldn't find any
evidence of a Dxi or VST instrument, even though I knew it was there
because it's part of the teplate I developed and I can play it. Where
should it be? Again, I assume I should be in the audio track, not the
MIDI track. Is that right?
Thanks,
Kevin
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Phil Muir
Sent: Sunday, April 24, 2005 5:43 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar 4 and vsts
Hi Kevin!!
You should be in the "affects" tab for affects whether they are DXi, or
.VST. Note: that includes instruments or affects. The "EQ" tab is for
the Sonatus EQ that is built into Sonar Producer. This tab is only for
that EQ and no other affects. The "volume" tab is just for volume
controls on that track or, bus in the Inspector view.
Regards, Phil Muir
P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, April 24, 2005 4:57 AM
Subject: [ddots-l] Re: sonar 4 and vsts
> Gord,
> If you can change parameters in a soft synth in the inspector, which
> tab do you need to be in in the inspector to use the assign option?
> Should you be in the Effects, EQ, Sends or Volume tab to make such a
> change? Which parameters of a soft synth can you change? I'm trying
> to compensate for the fact that none of the soft synths I own are
> visible in DirectiXer. Also, should you be on a softsynth's audio or
> MIDI channel to make such a change? Kevin
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Gordon Kent
> Sent: Thursday, April 21, 2005 12:13 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Press the applications key and up arrow to the reassign submenu, then
> right arrow and you'll see a list of all the available parameters.
> Press enter on
> the one you want and you'll be right on that parameter and ready to
> change
> it.
> Gord
> ----- Original Message -----
> From: "Kevin L. Gibbs" <kevjazz@xxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, April 21, 2005 11:49 AM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> How do you reassign the wigits?
> Kevin
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Gordon Kent
> Sent: Thursday, April 21, 2005 8:02 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Well, as I said, directixer has an option that will expose any
> automatable parameter on many soft synths and effect plug-ins in a
> list box, bypassing the graphical display completely. The track
> inspector can only display four parameters at a time, so you need to
> reassign the four widgets to display other parameters. The advantage
> to this method is that you can automate any of these parameters in
> Sonar so that they can be changed from within your project. Gord
> ----- Original Message -----
> From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, April 20, 2005 5:00 PM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> So if one could choose between Cakewalk VST wrapper and the
> directixer, the directixer would be better? Can you please explain why
> it is better? I have only used the cakewalk VST wrapper so far.
> Thanks. Jeanette
> ----- Original Message -----
> From: Gordon Kent
> To: ddots-l@xxxxxxxxxxxxx
> Sent: Wednesday, April 20, 2005 9:05 PM
> Subject: [ddots-l] Re: sonar 4 and vsts
>
>
> Sonar does include the cakewalk vst wrapper. The advantage of using
> directixer is that the parameters of many plug-ins can be exposed
from
> within the property window of the plug-in itself. If you use the
> cakewalk
> wrapper, you'll need to access the parameters from within the track
> inspector. This is certainly a viable alternative now.
> Gord
> ----- Original Message -----
> From: "Rod" <roddj12@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Wednesday, April 20, 2005 10:21 AM
> Subject: [ddots-l] sonar 4 and vsts
>
>
> If I have sonar 4, do I still need to get Directixer?
> Isn't there a plugin that does the work?
> thanks.
>
> Rod
>
> MSN: roddj12@xxxxxxxxxxx
> IM: Roddy12RA
>
> ===================
> "For it is a very remarkable thing that there are no men, not even
the
> insane, so dull and stupid that they cannot put words together in a
> manner
> to convey their thoughts." (Philosopher Descartes).
>
> "No power on earth can stop an idea whose time has come." Victor
> Hugo.
>
> ----- Original Message -----
> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, April 19, 2005 11:50 AM
> Subject: [ddots-l] Re: Tascam vw1082 working well.
>
>
> > I am still new to audio recording. Can someone explane what the
> taskam is
> > use for?
> > ----- Original Message -----
> > From: "Ricky Prevatte" <rickyprevatte@xxxxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Sunday, April 17, 2005 11:22 PM
> > Subject: [ddots-l] Tascam vw1082 working well.
> >
> >
> > > The subject says it all When all else fails get some one to read
> the
> > > manual fore you and then get to enjoy your product. I set the
> buffers
> got
> > > the ports set up and found that jaws reads the tascam control
> panel well
> I
> > > am really excided about this piece.
> > > Bounder Trio
> > > Ricky & Wendy
> > > and guide-dog, Sissy
> > > '99 36S Ford V10 Banks power
> > > Durango in tow
> > > Blue Ox, SMI braking and talking GPS
> > > By God's grace
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** ddots-l-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to
> > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> > >
> > >
> >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
