Steve, Excellent advice! Dave ----- Original Message ----- From: "Steve Matzura" <sm@xxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx>; "midi-mag" <midimag@xxxxxxxxxxx> Sent: Tuesday, March 23, 2010 09:21 Subject: [ddots-l] Re: power cords. On Tue, 23 Mar 2010 10:39:27 -0600, you wrote: >hello, does anyone know of a good resorce for power cords and general cords >for that matter. thanks. If you're talking about the trapezoid-shaped ones that come in either two- or three-pronged versions, either straight or right-angle connectors, they're a dime a dozen at any Radio Shack or electrical supply place. Walk down Main Street in your own town and find a hardware store or electrical supply store. They even come in various wire thicknesses to handle greater or lesser amounts of power. Oh yes, just because it's just a computer you're plugging in, don't think these things don't need to carry a lot of power. A computer with a 750-watt power supply shouldn't use a thin cord with #18 wire in it. I had this brought rudely to my attention many years ago when a computer with two 500-watt power supplies powering six SCSI drives and two tape drives was noticeably warmer than its neighbors. The plug was not exactly what I would have called hot, but definitely overheating. I immediately swapped the cord with another much thicker heavier-duty one. It never heated, and I even noticed a little better system performance. The cooling fans didn't change speed when the system got busy after the cord swap, and my wife told me the front-panel lights were brighter and didn't dim and fluctuate during periods of high disk activity. PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq