This is something I just thought of but it might work. Manually set up a system restore point before you starting with your sighted engineer. WHen you are done, just restore to that point and all your ct settings should go back to where they were and you won't lose any of the data you've done. Gord ----- Original Message ----- From: Phil Muir To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, March 25, 2006 3:31 PM Subject: [ddots-l] Re: ct and sighted colleagues Also, when you install CT the tooltips are turnned off in globle options. Also, I don't think setting up a separate user for using Sonar is a good idea as you wont have access to any presets in any of your audio and DXi affects. Regards, Phil Muir P J Muir Productions www.philmuir.com/ ----- Original Message ----- From: albertm13@xxxxxxxx To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, March 25, 2006 3:22 PM Subject: [ddots-l] Re: ct and sighted colleagues Hi, It might be a problem if the toolbars are changed. It might be a good idea to set up a separate Windows user for sighted people. You might want to check out http://www.dancingdots.com/support/tsusers.htm It might also be nice to hear what Gordon has to say but he might not get to this until Monday. Albert ________________________________________________________________________ Try Juno Platinum for Free! Then, only $9.95/month! Unlimited Internet Access with 1GB of Email Storage. Visit http://www.juno.com/value to sign up today!