[ddots-l] SV: Re: SV: SV: Re: Cakewalk VS-700C V-Studio controler
- From: "Dennis Madsen" <dennis.madsen@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 4 Sep 2010 22:08:23 +0200
Thanks Phil!
If someone in the UK can do the job i am absolutly interested. I am going to
save the information to later. I could not last year get my VS100 to work in
64 together with producer. It is a big mistery as the VS100 throws the out
put ports as soon as we press play. So i was lucky that CT was able to
manage 32 bit version on a 64 bit machine. It must be the computer that has
troubles someware and i am now a bit shaky to start all the mess up again to
go to 64 as i like to. I am also facing troubles with the soundcard inside
my computer. Everytime i plug a headphone in the plug, it get's confused and
are splitting the signal both to the speakers and the headphones. Sounds
pretty strange. I have to check my finances and do a bit of special
attention to my wife, to get another investment accepted either in a new
computer or taking it the hole way with a new surfase.
Take care and thank you for the advise!
Dennis
-----Oprindelig meddelelse-----
Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På
vegne af Phil Muir
Sendt: 4. september 2010 18:51
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] Re: SV: SV: Re: Cakewalk VS-700C V-Studio controler
Dennis, I take your point. OK so, 25% VAT plus 2.5% import tax. Why not
instead purchase a new PC from DARC Audio Computers. They are a specialist
DAW builder over here in the UK. They have had rave reviews in the
specialist magazine for people who are into putting studios together, Sound
On sound. That would cost you less than purchassing from the US. Also, you
would avoid import tax as you would be getting the purchase from another EU
country. Then, you would just need to fire Jaws and Cake Talking on to the
system and you're up and running. URL below:
http://www.directresolutions.co.uk/
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dennis Madsen
Sent: 04 September 2010 16:37
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] SV: SV: Re: Cakewalk VS-700C V-Studio controler
Hi Phil!
You are absolutly correct. The V A T to getting imported stuff for outside
the EU to Denmark is 25% Only trouble that i am a musician not a computer
freak. That is said with all respect of the people here on the list. Music
is in the same time for me a hobby. I am working full time with sales,
having choldren and are very comittet in cycling and the time i have left
is for making music not trobling with a computer. Not many in denmark are
using Sonar as blind and fore shure i dont know more than one. .
I got my computer in may and had it going as it was a 64 bit machine in
january when i learned about CT, as my only source to sonar introduced me to
jsonar. I have now learned a lot about Sonar and how to install and up date
my gear, Still i dont have the time to follow the development in the
hardware and software. My gear is working now. I am having problems with my
dell computer and when i update the hardware next time. I want somthing that
works out of the box. So i am prepared to pay extra for that knowledge.
Dennis
Sendt: 4. september 2010 10:06
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] SV: Re: Cakewalk VS-700C V-Studio controler
Hi Shawn!
I am a VS100 user and are running it as a soundcard and control surface for
producer 805
It is preforming well when recording audiotracks compared to level. It is
sounding digital and clean. As i do not have other cards to compare with, i
can not inform you if it sounds warmer than others. Today if i should start
all over, i would have chosen a different solution as the VS100 does not
work as well together with producer on the bottoms as i have hoped. It is
not accessable as a digital recorder as a stand alone recorder even that it
is build as one. So for me as blind my next set up will be comming as a
complete pack from Dancing dotts.
Personally i have been a fan of roland sound since the early jupiter days.
Now there are also in tune.
Dennis
-----Oprindelig meddelelse-----
Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På
vegne af Charles Marston
Sendt: 4. september 2010 04:00
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] Re: Cakewalk VS-700C V-Studio controler
Shawn:
I may be wrong, but I think the VS700 comes from a colaboration between
CakeWalk and Roland. I have not have any experience with this particular
unit, but before I got my ProjectMix and Sonar, I used to record with a
Roland VS2400CD which is a stand alone digital recorder. Now, as I listen
to my old recordings made with the roland, it seems that they have a
somewhat warmer quality to them as compared to the ProjectMix. Now based on
my very limited experience, I would think that the VS700 will have good
quality pre's.
I think a couple of people on this list are working with the VS100 unit.
They might be able to give you a better idea of the quality of these
interfaces.
--------------------------------------------------
From: "Shawn Brock" <shawn@xxxxxxxxxxxxxx>
Sent: Friday, September 03, 2010 7:20 PM
To: <ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] Cakewalk VS-700C V-Studio controler
> List,
>
> I just got a call from someone here in town to do some tracking.
>
> The guy is another Sonar man...
>
> One of his recommendations was, for me to bring any mics that I like
> to use, just in case what he has is not the best choice. This brought
> me to ask what kind of pre's he was using, in case I wanted to bring
mine...
>
> Maybe I miss heard him but I thought he said that he was just using
> the built in pre's on the Cakewalk VS-700C V. If not the 700, it was
> another cakewalk product.
>
> My question is this, are the pre's in the cakewalk products "up to snuff?"
>
> Are they as good or better than the M-Audio or Motu stuff?
>
> If not I'll drag my Universal Audio over there with my mics and guitars.
>
> I just hate taking all of this stuff out...
>
> Shawn
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
