There's a whole section called supported real time effects. If that's
what you mean by dialogue.
On 8/10/19, Chris Smart <csmart8@xxxxxxxxx> wrote:
I believe so, although it has been years since I've used CakeTalking.PLEASE READ THIS FOOTER AT LEAST ONCE!
The Sonitus Reverb should be covered.
At 03:20 PM 8/10/2019, you wrote:
Okay, that is good
Now, before I ask more questions, I have been
going through the reverb effects dialogue boxes
in sonar and I am not too familiar with the
dialogues, are these also covered in the cake talking tutorial?
Sent from my iPhone
On Aug 10, 2019, at 5:45 PM, Chris Smart <csmart8@xxxxxxxxx> wrote:actually not considered reading back over the
Not at all man. We're here to help!
At 12:41 PM 8/10/2019, you wrote:
Hello all
Thanks for all of the suggestions. I had
old cakewalk forums until now but I did find
some information on one of them after a quick google search.
relatively I mean that i can record my own midiI am still relatively new to all of this. By
projects, but I am just getting started with
audio effects and trying to explore what
posibilities and options that I have, so I hope
that my questions here are not too basic.
My apologies for the delay in getting
Sent from my iPhone
On Aug 10, 2019, at 4:43 PM, Chris Smart <csmart8@xxxxxxxxx> wrote:
SF, Reaper, and Samplitude will all let you do very fine editing
indeed.
At 11:41 AM 8/10/2019, you wrote:
Probably either or.
I also use SF Pro 10. I prefer SoundForge for this kind of thing
cause I find editing to precise audio points a bit less cumbersome.
However, I have used SF for many years. If you don't know how to
edit
there, I'd suggest staying with my instructions and Sonar...
On 8/10/19, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
Hello floyde
Thanks very much for the instructions.
busy and long day as my brother gotback to you. Yesterday was a really
ceremonies, but now I am back home andmarried and I had to go to 2 wedding
you can do this in sound forge asI will try out your instructions as you suggested
In your previous email, you said that
(not sure which version you have) but Iwell. I also have sound forge pro 10
present, bu but is it et easier to do in sound forgedon’t know how to use it at
for this at all. I never use it.or sonar?
Regards,
Josh
Sent from my iPhone
On Aug 9, 2019, at 3:43 AM, floyd white
<cavernrecording@xxxxxxxxx>
wrote:
No no. You don't need the clips pane
out. Now, i have never really worked
Follow my directions right in the track pane. F9 is your
starting
point, F10 is your end point, Control enter to select. alt c to
copy
and alt v to paste to a new track.
Nudging is done after selecting an area (clip) with control +
numpadinsert and then one of the 6 numpad keys to do the nudge.
I'd recommend going back to the CakeTalking tutorial for further
details. It is really really good and very easy to understand.
On 8/8/19, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
Hello floyde
Thanks a lot for this. I will try it
white <cavernrecording@xxxxxxxxx>in
the clips pain before. How do you nudge clips and coppy words?
All the best,
Josh
Sent from my iPhone
On Aug 9, 2019, at 2:59 AM, floyd
SoundForge, but here's how I would dowrote:
Ah okay. I usually do this with
effect. I don't think you're going toit with Sonar.
1. Copy the first word (if it' a vocal) and paste that word in
a
separate track. Add reverb as an
even the cakewalk reverbs shouldneed a high end verb to do this, so
long decay. It may work better ifwork. I'd recommend any verb with a
exactly at the point where the nowyou grab the verb through the process menu and add it that way
as
'printed'.
2. Now reverse the whole clip with the reverb.
3. Listen to the soloed clip and
adjust the reverb's volume to make itreversed word starts, delete only the word leaving the
reversed
reverb.
4. Last step is to nudge the remaining clip to line up and
stop
exactly at the point where the word starts on the original
track.
Oh and you will probably have to
trying tg to do is ts to only reverse the reberbbe correct.
Hope this helps,
Floyd...
On 8/8/19, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
Hello Floyde
Yes. So basically what I’m
reverse reverb effect just before theeffect, for example, to have a
something li like bar 10 10 as an example. I don’tvocal
comes in at, let’s say
t
reverb effect just before the vocalt
want
the
whole track reversed, just the
white <cavernrecording@xxxxxxxxx>comes
in
I hope that makes sense
All the best,
Josh
Sent from my iPhone
On Aug 9, 2019, at 2:04 AM, floyd
could reverse a reverb on a track orwrote:
Hey Josh,
I think you were asking if you
want to do. I can probably whalkclip while that track's audio is not reversed. Is that
right?
Can you tell me exactly what you
earlier but others may already haveyou
through getting it done.
Thanks,
Floyd...
On 8/8/19, A Ker <adelkerkadi@xxxxxxxxxxx> wrote:
Hi Josh,
I wish I could answer to you
commands, are they only to reverseanswered
you. Are you talking of reverb on a midi or audio track?
Thank you.
Adel
-----Message d'origine-----
De : ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]
De
la part de Josh Stundon
Envoyé : 6 août 2019 09:31
À : ddots-l@xxxxxxxxxxxxx
Objet : [ddots-l] Re: Reverse reverb effect
Okay. So if you put the reverb effect into the track and
you
sellected
an
area would it only reverse the reverb?
Sent from my iPhone
On Aug 6, 2019, at 12:42 AM, floyd white
<cavernrecording@xxxxxxxxx>
wrote:
It will reverse whatever tracks and area (clip) you
select.
Could be all tracks if you want.
On 8/5/19, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
Hi there,
Ohh, that is great. So these
process then audio arrow down tothe
actual track?
Sent from my iPhone
On Aug 5, 2019, at 1:45 AM, floyd white
<cavernrecording@xxxxxxxxx>
wrote:
select an area,
then From menu in Sonar, Go to
doing well. I wanted to let everyonereverse.
On 8/4/19, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
Hello all
I hope everyone on here is
running with my equipment againknow that I am finally up and
possible to do a reverse reverb effectand
am creating new projects.
Does anyone know if it is
internet how to do it, but am unsurein
Sonar? I have read on the
sonar with cake talking. Was thinkingif
this is possible to do in
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, toof
adding it to my vocal recordings and instrument tracks
for
creative
effects purposes.
All the best,
JoshPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following
link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on
the
immediately following link:
and in the Subject line type faqddots-l-request@xxxxxxxxxxxxx
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, toPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following
link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on
the
immediately following link:
and in the Subject line type faqddots-l-request@xxxxxxxxxxxxx
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, toPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following
link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on
the
immediately following link:
and in the Subject line type faqddots-l-request@xxxxxxxxxxxxx
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, toPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following
link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on
the
immediately following link:
mode, click on the immediately following link:PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!PLEASE READ THIS FOOTER AT LEAST ONCE!ddots-l-request@xxxxxxxxxxxxx and in the Subject line typePLEASE READ THIS FOOTER AT LEAST ONCE!
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject q or send a message,
to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation
mode, click on the immediately following link:ddots-l-request@xxxxxxxxxxxxx?subject=faq orPLEASE READ THIS FOOTER AT LEAST ONCE!
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation
ddots-l-request@xxxxxxxxxxxxx?subject=faq orPLEASE READ THIS FOOTER AT LEAST ONCE!
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq