[ddots-l] Re: Recording with laptop
- From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 17 Oct 2009 22:39:53 +0100
Hi Mark,
Is it a static sound or digital noise?
Sometimes when using mixers with laptops you may experience constant
intermittent digital noise, this sometimes can be sorted with a "Ground Loop
Isolator."
Simply plug your mixer out cables into the female phonos on the Ground Loop
Isolator then plug the Ground Loop Isolator into the line in on the sound
card.
They are not too expensive, around £14 UK.
Steve W
----- Original Message -----
From: "Mark Dew" <jmkeybd1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, October 17, 2009 5:55 PM
Subject: [ddots-l] Recording with laptop
Hello folks.
Here's the problem.
I have a friend who has just a laptop and a mackie 8 channel mixer.
She has only a mic input on the laptop.
The audio siggnel is too hot.
She did perchased a u s b sound card that has a line in jack.
When she records using the line in there is a static sound she can't get
rid of.
I believe the sound card is bad.
The mic input on the laptop itself is ok, except too hot.
My question is, is there such a thing as an audio cable that would
restrict
the audio level?
I had her to turn down the mic input on the laptop but with no results.
Any ideas would be welcome.
Cheers!
Mark
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
