[ddots-l] Re: Mastering a finished project.
- From: "Jim Jackson" <cs2005@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 17 Nov 2005 14:56:48 -0500
Kurt, do you have Adobe reader on your machine? If not you'll to get it but
as for the links they both work for me. Good luck.
----- Original Message -----
From: "kurt" <kurt@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, November 17, 2005 1:53 PM
Subject: [ddots-l] Re: Mastering a finished project.
> Hey, I wasn't able to load that page, it says server not found. Any ideas
> how to get it?
> Kurt
>
> ----- Original Message -----
> From: "Chris Smart" <chris_s@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, November 15, 2005 11:59 AM
> Subject: [ddots-l] Re: Mastering a finished project.
>
>
> > Even though their Ozone mastering plugin isn't all that accessible, at
> > least not the DirectX version when I tried it, the manufacturer iZotope
> > wrote a great mastering guide, available from their Web site as a .pdf
> > document. Lots of great tips in there.
> > Mastering:
> > http://www.izotope.com/products/audio/ozone/OzoneMasteringGuide.PDF
> > Dithering:
> > http://www.izotope.com/products/audio/ozone/OzoneDitheringGuide.pdf ...
> >
> > hope that helps some. A lot of it is applicable to whatever
> > software/hardware you're using.
> >
> > Chris
> >
> > At 01:38 PM 11/15/2005, you wrote:
> >>Mastering is so subjective, you really need to try and try again. After
a
> >>while, you'll develop common starting places, and settings that you'll
use
> >>for different projects. Best of luck,
> >>Kurt,
> >>Ps, always try your mixes on more than one set of speakers, IE your car
or
> >>home stereo, as well as your monitors. Lots of folks get something
> >>sounding right on their primary system, and take it to other people only
> >>to have it sounding muddy or boxy on other systems. Try to master as
flat
> >>as possible so your music will sound good on all systems.
> >>
> >>----- Original Message -----
> >>From: <mailto:cs2005@xxxxxxxxx>Jim Jackson
> >>To: <mailto:ddots-l@xxxxxxxxxxxxx>ddots-l@xxxxxxxxxxxxx
> >>Sent: Monday, November 14, 2005 9:49 PM
> >>Subject: [ddots-l] Mastering a finished project.
> >>
> >>Hello all, I have tried to record a project with no vocals and have
> >>converted that recording to audio via the bounce to track command. Once
> >>bounced to track completes, I then add a little reverb and then export
the
> >>file in to a wav file. I import the project in to Sound Forge and add a
> >>little highs frequency boost and some compression to the project and
save
> >>as a file to burn to disk. However, I can never get things just right,
> >>it's either too much base, not enough highs, too little volume or too
much
> >>volume. Other than hit and miss kind of action is there anything or any
> >>instructions that I can find that will give me step by step directions
on
> >>how to master my project? Thanks
> >>
> >>
> >>----------
> >>No virus found in this outgoing message.
> >>Checked by AVG Free Edition.
> >>Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/05
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> > Subject:- faq
> >
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.13.3/173 - Release Date: 11/16/05
>
>
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.3/173 - Release Date: 11/16/05
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
