Hi,
That's OK for single-host operation, which is where I think you may be
hitting problems. If you go to the drivers section of www.m-audio.com
you'll find a driver set to install that supports multi-hosting of the
unit.
These are the drivers I use with my own M-Audio USB keyboards and I've had
no problems since installing them.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Phil Halton
Sent: 02 March 2007 15:48
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: MAudio audiophile & MAudio keystation49
There are no drivers for the KS in windows XP. its a class complient
device
which means its strictly "plug n play". You just plug it into the usb
port,
turn it on, and windows recognizes it.
----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, March 02, 2007 4:12 AM
Subject: [ddots-l] Re: MAudio audiophile & MAudio keystation49
It'd be worth re-installing the KS drivers before you start to get
complicated and call M-Audio.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
Behalf Of Phil Halton
Sent: 02 March 2007 01:55
To: ddots-l
Subject: [ddots-l] MAudio audiophile & MAudio keystation49
I installed my new MAudiophileUSB(aftewr some hair pulling) and was very
happy when I loaded up some audio in sonar and everything seemed to work
fine. Then, with sonar still open, I loaded up winamp, set it to use the
audiophile, and that worked too. So far so good.
Then I went to use the MAudio Keystation 49 and everything went south on
me.
I have the KS49 on USB, although it has midi jacks.
This is what happened: After setting a midi track to use a softsynth
with
the keystation, it wouldn't sound. Next, I tried to play the audio again
and got a driver error(something like driver doesn't support file format
or
is in use by another device). I switched back to winamp and got the same
error upon playback.
Interestingly, When I turned on the keystation and audiophile and opened
up
sonar, the midi device name for the KS49 had changed. It used to appear
as
USB keystation or something like that. Now it (or something) shows up as
USB audio device, and the audiophile midi jacks show up as audiophile
midi.
Darn strange!
Question: Would I be better off connecting the KS49 via midi cables to
the
audiophile midi 1x1 rather than via USB? It seems like the audiophile is
taking over in some weird way.
Note: the KS49 worked fine for me on USB before installing the
audiophile.
I suspect the audiophile drivers don't like the USB competition.
Any help Please!
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
