[ddots-l] Re: Live synth pro problems
- From: "Rod" <roddj12@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 31 May 2005 10:42:29 -0400
How can i do that please Phill?
----- Original Message -----
From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, May 31, 2005 10:39 AM
Subject: [ddots-l] Re: Live synth pro problems
> You can delete presets with the Sonar plug-in manager. You may need to
install that though. Note:
> the Sonar plug-in manager is not installed by default.
>
> Regards, Phil Muir
>
> P J Muir Productions
> URL: www.philmuir.com/
> ----- Original Message -----
> From: "Rod" <roddj12@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, May 31, 2005 2:00 PM
> Subject: [ddots-l] Live synth pro problems
>
>
> > Hi, gangs:
> >
> > I have added a couple of sound fonts presets in live synth pro. I soon
> > decided to delete them, but I deleted the files with the folder all
> > together, not the presets in live synth pro. Now, everytime i arrow up
or
> > down to choose the other presets that remained, I got the error message
that
> > live synth pro could not find this preset, with an ok button popped up.
> > Anyone know pleaase how I can delete those presets in the program? With
that
> > ok button popping up, it is impossible to delete it and ultimately
continue
> > to use the program. Thanks!
> >
> > Rod
> >
> > ----- Original Message -----
> > From: "David Eagle" <deagle_889@xxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Tuesday, May 31, 2005 7:27 AM
> > Subject: [ddots-l] control surfaces
> >
> >
> >> Hi! I am thinking about starting off with a small type of studio
thing
> > in my house, to start trying to get people's work to produce,which will
> > hopefully expand further so that I can get more. I assume that an
essential
> > item would be a control surface. The reason I say this is essential is
> > because I only have one input and output medium on my soundcard, so
routing
> > it to a normal mixer would not work I don't think. So rather than
getting
> > another sound card for the time being, I thought I might as well look at
> > getting a control surface, which will save messing around with lots of
wires
> > and configuring the desk which can often go wrong. PLus It'll most
likely
> > reduce any hiss from all this equipment if its controled through the
midi
> > interface.
> >> So what control surfaces could anyone recomend. I don't want anything
too
> > extensive. A lot of the control surfaces I've seen on the internet aare
> > quite complex and you can control everything on them. I'm looking for a
cost
> > effective (which is a bit of a vague word) piece of equipment that I can
mix
> > with. Motorized faders don't really matter I don't think, if that'll
knock
> > the price down a bit, because I will be automating the faders with my
hands
> > and relying on my ears rather than feeling the faders.
> >> Sorry for this email's length and thanks!
> >> David
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >>
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
