Yes. I’m in the synth rack. Okay. Now, I did it again and I got a completely
different result. This looks like what I would have expected. There are a
bunch of menus corresponding to Arp, Arp Swing, Arp Octave, etc. All of them
have submenus with a bunch of stuff on them. It doesn’t show a lot of stuff
and it may not show the same things that the guy who developed the Omnisphere
solution exposed in his effort. So, I think I’m going to put this aside for
now and see what Native does in later versions. I wouldn’t know what to select
at this point.
Thanks,
Kevin
On Apr 4, 2017, at 3:44 PM, DJX <megamansuperior@xxxxxxxxxxx> wrote:
Where are you pressing application key on? Are you in the synth rack?
What exactly are you trying to do?
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on behalf
of Kevin L Gibbs <kevjazz@xxxxxx>
Sent: Tuesday, April 4, 2017 4:39:37 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: How to expose the automatable parameters in Omnisphere
with Sonar 8.5?
The Applications key yielded nothing useful:
Here is what I got:
Remove from Group, Unavailable.
Clear Group, Unavailable.
Group Submenu
Below that is a group of 24 or so possible subgroups.
Group Manager.
Value Submenu
Below that is:
Set Start as Curent.
Set End as Current.
Set Snap to as Current.
Automation Rad
Automation Write
Automation SnapshotRemote Controldisable Remote Controlk
Similarly, inserting Omnisphere on a track’s effects bin didn’t do anything
useful either. That may have to do with he fact that I really never did
learn the inspector. But I’m progressively of the opinion that this is
probably not the way to go.
Thanks,
Kevin
On Apr 4, 2017, at 3:06 PM, DJX <megamansuperior@xxxxxxxxxxx
<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Once you load omnisphere and select your sound, close the omni window. From
the track view, press alt 8 to open the synth rack. Now up or down arrow to
the instance of omnisphere you are working with. Now press the context key,
also called the applications key, and it will show you a list of the
available controls. Alternatively, insert the synth on an audio track's
effect bin, and manually assign a midi track to it. Then use the audio track
with the inspector.
Note however that omnisphere 1 at least didn't expose too many parameters,
at least not when i tried it last.
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <mailto:ddots-l-bounce@xxxxxxxxxxxxx>
<ddots-l-bounce@xxxxxxxxxxxxx <mailto:ddots-l-bounce@xxxxxxxxxxxxx>> on
behalf of Kevin L Gibbs <kevjazz@xxxxxx <mailto:kevjazz@xxxxxx>>
Sent: Tuesday, April 4, 2017 3:46:03 PM
To: ddots-l@xxxxxxxxxxxxx <mailto:ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] Re: How to expose the automatable parameters in
Omnisphere with Sonar 8.5?
Xavier,
I assume the context menu is Shift A. That gives me Rewire and soft synths.
I can choose the properties page of Omnisphere there. But I have no idea
where I find the list of automatalbe parameters there. Do I have to click
on knobs on the on screen interface of Omnisphere?
I don’t think I’m following. Like I said, I MIDi learned RMx a decade ago.
But I have no idea how to enable automation here.
On Apr 4, 2017, at 2:41 PM, DJX <megamansuperior@xxxxxxxxxxx
<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Go to synth rack, use context menu on the desired synth, and assign one of
the parameters. Those are automatable.
Regards, DJX
From: ddots-l-bounce@xxxxxxxxxxxxx <mailto:ddots-l-bounce@xxxxxxxxxxxxx>
<ddots-l-bounce@xxxxxxxxxxxxx <mailto:ddots-l-bounce@xxxxxxxxxxxxx>> on
behalf of Kevin L Gibbs <kevjazz@xxxxxx <mailto:kevjazz@xxxxxx>>
Sent: Tuesday, April 4, 2017 3:36:49 PM
To: ddots-l@xxxxxxxxxxxxx <mailto:ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] How to expose the automatable parameters in Omnisphere
with Sonar 8.5?
Subject says it all. Trying to record what I believe are automation moves
in Omnisphere as generated by my KK keyboard. I guess I need to expose the
automatable parameters of Omnisphere in Sonar. I’ve done it in RMX. But
it was years ago.
Any thoughts?
KevinPLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx
<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx <mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx
<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx <mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
faq
