Thanks for all your suggestions Steve, To all, Does anybody know How to access the properties page from the synth rack? I followed the below CT instructions and when I press P from within the synth rack, it does not take me to synth properties; it takes me to the view when pressing control + "y" within a midi track. -------- Original Message -------- > Subject: [ddots-l] Re:_[ddots-l]_Configuring__soun_d_pat_ches > _to_conform_t_o_Sonar’s_t_empo > From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > Date: Thu, September 08, 2011 12:03 pm > To: <ddots-l@xxxxxxxxxxxxx> > > > Hi Ivan, > > Does Jaws say anything at all when you press P whilst in the synth rack? > this could be one of the things that's changed in the later versions of > Sonar, it maybe control P or shift P. If you have no luck, try changing the > subject matter on the forum to: "How to access the properties page in the > synth rack" and repost. > > Steve W > > ----- Original Message ----- > From: <ivanlopez@xxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Thursday, September 08, 2011 7:04 PM > Subject: [ddots-l] Configuring_ soun_d_pat_ches_to_conform_t_o_Sonar’s_t > empo > > > Hello Steve, > > I am working on all your suggestions. > > I am also using the below CT lesson on “Using the Synth Rack View. > > One of the challenges I am experiencing is accessing the synth > properties page by pressing “P” within the synth rack view; your > instructions are correct; it is also stated in the below CT lesson. > > The CT manual states: "There are 5 hotkeys that execute important synth > rack functions." One of these is: "The letter P. Opens the current Soft > Synth's Properties page." > > As of now, it does look not very straight forward and it may cause a > delay (pun intended). > > It looks like one of those things you look at for a while and than the > epiphany comes after you realize that you have not executed a step > correctly or something. > > Many thanks for your assistance my friend. > > Cheers! > > Ivan > > 33G. Using the Synth Rack View. > 1. All the soft synths that you insert are in a list in the Synth Rack > view. You can use the Synth Rack View to insert soft synths into the > track pane, open their properties pages, delete them from your project, > and also control there parameters, and even go into automation record > and adjust there parameters. If you decide to not use a soft synth that > you have inserted, you should delete the associated MIDI and audio > tracks, and then delete the soft synth from the Synth Rack view. If you > don't delete the soft synth from the Synth Rack view, it will continue > to tax your system with the overhead it takes to load the soft synth > into SONAR. This can sometimes take up a lot of computing power. > 2. Sonar's new Synth rack has more capabilities than previous versions > of SONAR. In addition, it's more accessible than before. As before, each > soft synth that you've inserted, is displayed in the Synth rack. You can > down an up arrow through them. You can TAB and SHIFT TAB through the > Synth Rack Controls for the current synth, and also right and left arrow > through nobs that have been assigned to control the current soft > synth’s parameters. > 3. You open the synth rack view with ALT + 8. You can also open it via > the View menu. And if you ever lose focus in the Synth Rack View, press > F6 to reset the focus. To close the synth rack view, press CONTROL + F4. > Now here's a list of the Synth Rack controls, and what they are for. > A. The Soft Synth's name. Press ENTER on it, and the soft synth's dialog > opens. > B. The Preset box. Press ENTER and a Menu of available presets opens, > from which you can pick. > C. The mute button. Press ENTER to mute or unmute the soft synth. > D. The solo button. Press ENTER to solo or unsolo the soft synth. > E. The Freeze/Unfreeze Synth button. Press ENTER to toggle. > E. Read Automation button. By default it's on. Press ENTER to > disable/enable reading of automation for all assigned controls. > F. Write Automation button. By default it's off. Press ENTER to > enable/disable writing of automation for all assigned controls. > G. The Show Assigned Controls button. This will toggle the display of > any controls that have been assigned. To assign controls, press the > Application key on this button. The Assignable Control menu will open. > You can display the controls that are listed in this menu by pressing > ENTER on them so that they get checked. Then in the Synth rack, the > controls you checked will be displayed as knobs. This is great because > many soft-synth dialogs are inaccessible, except for their preset combo > boxes. > H. The knobs. These are all the controls that you've assigned in the > form of knobs. Here's what you can do with them. > h1. To adjust them, num lock must be turned on. Then use num plus, and > num minus. > h2. If you wish to Write enable automation for just that control, then > press the application key, and from the context menu, check Write > Automation Enable. Note that for this to work, you don't hit the write > enable automation button, because that button write enables all > controls. > h3. If you wish to delete that assigned control, press the application > key, and from the context menu, press ENTER on Delete. > 4. There are 5 hotkeys that execute important synth rack functions. > Mid Section Delete. Deletes the current soft synth. > The letter P. Opens the current Soft Synth's Properties page. > The letter O. Open the insert Soft Synth options dialog, where you can > choose options for what happens when you insert a soft synth. > The letter F. Open the Freeze Synth option menu. > > ------- Original Message -------- > > Subject: [ddots-l] Re:_[ddots-l]_Re:_[ddots-l]_Re:_[ddots-l]_Re:_ > > Re:_[ddots-l]_Re:_Re:_[ddots-l]_Configuring_ > > soun_d_pat_ches_to_conform_t_o_Sonar’s_t empo > > From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > > Date: Thu, September 08, 2011 7:25 am > > To: <ddots-l@xxxxxxxxxxxxx> > > > > > > Hi Ivan, > > > > This maybe a thought, go to delay by first going to the synth rack like a > > explained in the last email. > > Now rather than go through all the delays, just arrow to off and press > > enter, as this synth delay will be a nightmare to synchronise to Sonar's > > tempo. > > Once the synth is dry, just select a sonitus delay as they are in sync > > with > > Sonar's tempo. > > > > Steve W > > ----- Original Message ----- > > From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > > To: "ddtots" <ddots-l@xxxxxxxxxxxxx> > > Sent: Thursday, September 08, 2011 3:13 PM > > Subject: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: > > Re:_[ddots-l]_Re:_Re:_[ddots-l]_Configuring_soun > > d_pat_ches_to_conform_t_o_Sonar’s_tempo > > > > > > > Hi Ivan, > > > > > > Ok, sorry about the delay, no pun intended. > > > > > > I'm going to explain as a Sonar 7 user, I imagine this should be similar > > > on > > > the later Sonar updates. > > > > > > 1: alt 8 for synth rack, > > > 2: arrow down to the synth you wish to make delay changes, > > > 3: press P to open the synth properties page, > > > 4: press F4, > > > 5: arrow down until you hear "delay control" and press enter, > > > 6: Jaws should say, "delay button for current element" press enter on > > > this, > > > 7: arrow down through all kinds of delay types and click on lets say > > > stereo > > > delay, > > > 8: you can tab through the parameters and change things like delay time, > > > delay repeats and so on. > > > 9: once you have the delay set how you want it to sound just press > > > control > > > F4 to take you back to the synth rack... > > > > > > I know it's not as straight forward as rapture, however, I do like using > > > DSF > > > packages in dimension Pro because Cake Talking allows us more access to > > > the parameters > > > than most other soft synth products. > > > > > > Hope this helps. > > > > > > To all on the list, if I've made any major information booboos please > > > chime in. > > > > > > Steve W > > > ----- Original Message ----- > > > From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > > > To: <ddots-l@xxxxxxxxxxxxx> > > > Sent: Wednesday, September 07, 2011 10:08 PM > > > Subject: [ddots-l] Re: [ddots-l] Re: > > > Re:_[ddots-l]_Re:_Re:_[ddots-l]_Configuring_soun > > > d_pat_ches_to_conform_t_o_Sonar’s_tempo > > > > > > > > >> Hi Ivan, > > >> > > >> Tomorrow, before I start work on my project, I'll take a quick look to > > >> see > > >> if the DSF packages work like the Dimension Pro sounds do within the > > >> synth > > >> rack. > > >> > > >> I'll email tomorrow my findings. > > >> > > >> Steve W > > >> ----- Original Message ----- > > >> From: <ivanlopez@xxxxxxxxxxx> > > >> To: <ddots-l@xxxxxxxxxxxxx> > > >> Sent: Wednesday, September 07, 2011 8:10 PM > > >> Subject: [ddots-l] Re: Re:_[ddots-l]_Re:_Re:_[ddots-l]_Configuring_soun > > >> d_pat_ches_to_conform_t_o_Sonar’s_tempo > > >> > > >> > > >> Thanks Steve, > > >> > > >> I am working on your suggestions, though I did go to the synth rack > > >> alt+8 and went down to the softsynth and patch in question and I did > > >> not > > >> see a place where you can adjust any parameters other than changing a > > >> patch. > > >> > > >> The rest of the options say: “synth is connected,” “Plug-in > > >> name” “Mute” “Solo” “synth is not frozen” > > >> “Automation” “automation write” “show assign controls” > > >> > > >> I also messed with the show assign controls and I can’t tell any > > >> changes when I pick settings from this option. > > >> > > >> Cakewalk’s rep said to go under Dimensions options (F4) and se if the > > >> cut off or amplitude modulation options will fix the problem. > > >> > > >> Thanks again and cheers! > > >> > > >> Iván > > >> > > >> -------- Original Message -------- > > >>> Subject: [ddots-l] Re:_[ddots-l]_Re:_Re:_[ddots-l]_Configuring_soun > > >>> d_pat_ches_to_conform_t_o_Sonar’s_tempo > > >>> From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > > >>> Date: Tue, September 06, 2011 7:44 am > > >>> To: <ddots-l@xxxxxxxxxxxxx> > > >>> > > >>> > > >>> Hi Ivan, > > >>> > > >>> I too have some of the DSF products such as proteus 2000 which work in > > >>> dimension pro. Dimension Pro has some CT scrip's so you can go into > > >>> the > > >>> parameters and change things like the reverb, Chorus, delay, Pitch and > > >>> so > > >>> on. > > >>> > > >>> I think this is the only way you are going to get the effects or > > >>> arpeggiater > > >>> sequences to be in time with Sonar. > > >>> > > >>> All the above is found in the synth rack. > > >>> > > >>> Hope this helps. > > >>> > > >>> ----- Original Message ----- > > >>> From: <ivanlopez@xxxxxxxxxxx> > > >>> To: <ddots-l@xxxxxxxxxxxxx> > > >>> Sent: Monday, September 05, 2011 6:19 PM > > >>> Subject: [ddots-l] Re: Re:_[ddots-l]_Configuring_sound_pat > > >>> ches_to_conform_t > > >>> o_Sonar’s_tempo > > >>> > > >>> > > >>> Sorry, my below message apparently did not come through in the last > > >>> email. > > >>> > > >>> Hi Steve, > > >>> > > >>> I bought some expansion packs made by Digital Factory for use in > > >>> Dimension pro. > > >>> > > >>> Some of these sound patches or presets have a rhythm aspect to them > > >>> that > > >>> is independent from Sonar’s arpeggeator and the rhythm is not aligned > > >>> to Sonar’s tempo. > > >>> > > >>> The rhythmic aspect of the presets I am referring to sometimes is > > >>> influenced by an arpeggio or reverb effect. > > >>> > > >>> Dimension, Rapture, and Z3tar+ have many of these presets that have a > > >>> rhythmic component and they are already configured to Sonar’s tempo. > > >>> > > >>> This means that I can alter Sonar’s tempo and the sound patch or > > >>> preset’s in Dimension, Rapture, and Z3tar+ will follow Sonar’s tempo > > >>> changes, but not when I do tempo changes with Digital Factories > > >>> expansion packs. > > >>> > > >>> I hope this makes sense, > > >>> > > >>> Cheers! > > >>> > > >>> Iván > > >>> > > >>> ------- Original Message -------- > > >>> > Subject: [ddots-l] Re: Re:_[ddots-l]_Configuring_sound_pat > > >>> > ches_to_conform_t o_Sonar’s_tempo > > >>> > From: <ivanlopez@xxxxxxxxxxx> > > >>> > Date: Sun, September 04, 2011 11:58 pm > > >>> > To: ddots-l@xxxxxxxxxxxxx > > >>> > > > >>> > > > >>> > > -------- Original Message -------- > > >>> > > Subject: [ddots-l] > > >>> > > Re:_[ddots-l]_Configuring_sound_patches_to_conform_t > > >>> > > o_Sonar’s_tempo > > >>> > > From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx> > > >>> > > Date: Sun, September 04, 2011 2:07 pm > > >>> > > To: <ddots-l@xxxxxxxxxxxxx> > > >>> > > > > >>> > > > > >>> > > Hi Ivan, > > >>> > > > > >>> > > Do you mean arpeggiator patterns aren't matching tempo when you > > >>> > > change > > >>> > > tempo > > >>> > > in Sonar? > > >>> > > Try changing the sonar tempo up or down just to see if the > > >>> > > arpeggiator > > >>> > > even > > >>> > > changes tempo at all, I have a feeling it'll stay static as these > > >>> > > are > > >>> > > old > > >>> > > synths. You may find the answer you need in the synth rack as > > >>> > > dimension > > >>> > > Pro > > >>> > > does have fairly good access. > > >>> > > > > >>> > > Sorry I couldn't be of anymore help. > > >>> > > > > >>> > > Steve W > > >>> > > > > >>> > > ----- Original Message ----- > > >>> > > From: <ivanlopez@xxxxxxxxxxx> > > >>> > > To: <ddots-l@xxxxxxxxxxxxx> > > >>> > > Sent: Sunday, September 04, 2011 9:05 AM > > >>> > > Subject: [ddots-l] Configuring sound patches to conform to Sonar’s > > >>> > > tempo > > >>> > > > > >>> > > > > >>> > > Howdy list, > > >>> > > > > >>> > > The sound patches for my Digital Factory expansion packs (for > > >>> > > Dimension) > > >>> > > do not follow Sonar’s tempo. > > >>> > > > > >>> > > Has anybody come across this situation or does anybody know how to > > >>> > > configure sound patches so they conform to Sonar’s tempo? > > >>> > > > > >>> > > Many thanks! > > >>> > > > > >>> > > Iván > > >>> > > > > >>> > > PLEASE READ THIS FOOTER AT LEAST ONCE! > > >>> > > To leave the list, click on the immediately following link: > > >>> > > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe > > >>> > > If this link doesn't work then send a message to: > > >>> > > ddots-l-request@xxxxxxxxxxxxx > > >>> > > and in the Subject line type > > >>> > > unsubscribe > > >>> > > For other list commands such as vacation mode, > > >>> > > click on the immediately following link: > > >>> > > ddots-l-request@xxxxxxxxxxxxx?subjectq or > > >>> > > send a message, to > > >>> > > ddots-l-request@xxxxxxxxxxxxx > > >>> > > and in the Subject line type > > >>> > > faq > > >>> > > > > >>> > > > > >>> > > __________ Information from ESET NOD32 Antivirus, version of virus > > >>> > > signature > > >>> > > database 6435 (20110904) __________ > > >>> > > > > >>> > > The message was checked by ESET NOD32 Antivirus. > > >>> > > > > >>> > > http://www.eset.com > > >>> > > > > >>> > > > > >>> > > > > >>> > > > > >>> > > __________ Information from ESET NOD32 Antivirus, version of virus > > >>> > > signature database 6435 (20110904) __________ > > >>> > > > > >>> > > The message was checked by ESET NOD32 Antivirus. > > >>> > > > > >>> > > http://www.eset.com > > >>> > > > > >>> > > > > >>> > > > > >>> > > PLEASE READ THIS FOOTER AT LEAST ONCE! > > >>> > > To leave the list, click on the immediately following link: > > >>> > > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > >>> > > If this link doesn't work then send a message to: > > >>> > > ddots-l-request@xxxxxxxxxxxxx > > >>> > > and in the Subject line type > > >>> > > unsubscribe > > >>> > > For other list commands such as vacation mode, > > >>> > > click on the immediately following link: > > >>> > > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > > >>> > > send a message, to > > >>> > > ddots-l-request@xxxxxxxxxxxxx > > >>> > > and in the Subject line type > > >>> > > faq > > >>> > > > >>> > PLEASE READ THIS FOOTER AT LEAST ONCE! > > >>> > To leave the list, click on the immediately following link: > > >>> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > >>> > If this link doesn't work then send a message to: > > >>> > ddots-l-request@xxxxxxxxxxxxx > > >>> > and in the Subject line type > > >>> > unsubscribe > > >>> > For other list commands such as vacation mode, > > >>> > click on the immediately following link: > > >>> > ddots-l-request@xxxxxxxxxxxxx?subjectq or > > >>> > send a message, to > > >>> > ddots-l-request@xxxxxxxxxxxxx > > >>> > and in the Subject line type > > >>> > faq > > >>> > > >>> PLEASE READ THIS FOOTER AT LEAST ONCE! > > >>> To leave the list, click on the immediately following link: > > >>> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe > > >>> If this link doesn't work then send a message to: > > >>> ddots-l-request@xxxxxxxxxxxxx > > >>> and in the Subject line type > > >>> unsubscribe > > >>> For other list commands such as vacation mode, > > >>> click on the immediately following link: > > >>> ddots-l-request@xxxxxxxxxxxxx?subjectq or > > >>> send a message, to > > >>> ddots-l-request@xxxxxxxxxxxxx > > >>> and in the Subject line type > > >>> faq > > >>> > > >>> > > >>> __________ Information from ESET NOD32 Antivirus, version of virus > > >>> signature > > >>> database 6440 (20110906) __________ > > >>> > > >>> The message was checked by ESET NOD32 Antivirus. > > >>> > > >>> http://www.eset.com > > >>> > > >>> > > >>> > > >>> > > >>> __________ Information from ESET NOD32 Antivirus, version of virus > > >>> signature database 6440 (20110906) __________ > > >>> > > >>> The message was checked by ESET NOD32 Antivirus. > > >>> > > >>> http://www.eset.com > > >>> > > >>> > > >>> > > >>> PLEASE READ THIS FOOTER AT LEAST ONCE! > > >>> To leave the list, click on the immediately following link: > > >>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > >>> If this link doesn't work then send a message to: > > >>> ddots-l-request@xxxxxxxxxxxxx > > >>> and in the Subject line type > > >>> unsubscribe > > >>> For other list commands such as vacation mode, > > >>> click on the immediately following link: > > >>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or > > >>> send a message, to > > >>> ddots-l-request@xxxxxxxxxxxxx > > >>> and in the Subject line type > > >>> faq > > >> > > >> PLEASE READ THIS FOOTER AT LEAST ONCE! > > >> To leave the list, click on the immediately following link: > > >> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe > > >> If this link doesn't work then send a message to: > > >> ddots-l-request@xxxxxxxxxxxxx > > >> and in the Subject line type > > >> unsubscribe > > >> For other list commands such as vacation mode, > > >> click on the immediately following link: > > >> ddots-l-request@xxxxxxxxxxxxx?subjectq or > > >> send a message, to > > >> ddots-l-request@xxxxxxxxxxxxx > > >> and in the Subject line type > > >> faq > > >> > > >> > > >> __________ Information from ESET NOD32 Antivirus, version of virus > > >> signature database 6445 (20110907) __________ > > >> > > >> The message was checked by ESET NOD32 Antivirus. > > >> > > >> http://www.eset.com > > >> > > >> > > >> > > >> > > >> __________ Information from ESET NOD32 Antivirus, version of virus > > >> signature database 6445 (20110907) __________ > > >> > > >> The message was checked by ESET NOD32 Antivirus. > > >> > > >> http://www.eset.com > > >> > > >> > > >> > > >> PLEASE READ THIS FOOTER AT LEAST ONCE! > > >> To leave the list, click on the immediately following link: > > >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > >> If this link doesn't work then send a message to: > > >> ddots-l-request@xxxxxxxxxxxxx > > >> and in the Subject line type > > >> unsubscribe > > >> For other list commands such as vacation mode, click on the immediately > > >> following link: > > >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or > > >> send a message, to ddots-l-request@xxxxxxxxxxxxx > > >> and in the Subject line type > > >> faq > > >> > > >> > > >> __________ Information from ESET NOD32 Antivirus, version of virus > > >> signature database 6446 (20110908) __________ > > >> > > >> The message was checked by ESET NOD32 Antivirus. > > >> > > >> http://www.eset.com > > >> > > >> > > >> > > > > > > > > > __________ Information from ESET NOD32 Antivirus, version of virus > > > signature database 6446 (20110908) __________ > > > > > > The message was checked by ESET NOD32 Antivirus. > > > > > > http://www.eset.com > > > > > > > > > > > > > > > __________ Information from ESET NOD32 Antivirus, version of virus > > > signature database 6447 (20110908) __________ > > > > > > The message was checked by ESET NOD32 Antivirus. > > > > > > http://www.eset.com > > > > > > > > > > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > > > To leave the list, click on the immediately following link: > > > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > > If this link doesn't work then send a message to: > > > ddots-l-request@xxxxxxxxxxxxx > > > and in the Subject line type > > > unsubscribe > > > For other list commands such as vacation mode, click on the immediately > > > following link: > > > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > > > send a message, to ddots-l-request@xxxxxxxxxxxxx > > > and in the Subject line type > > > faq > > > > > > > > > __________ Information from ESET NOD32 Antivirus, version of virus > > signature database 6447 (20110908) __________ > > > > The message was checked by ESET NOD32 Antivirus. > > > > http://www.eset.com > > > > > > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > > To leave the list, click on the immediately following link: > > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > > If this link doesn't work then send a message to: > > ddots-l-request@xxxxxxxxxxxxx > > and in the Subject line type > > unsubscribe > > For other list commands such as vacation mode, > > click on the immediately following link: > > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > > send a message, to > > ddots-l-request@xxxxxxxxxxxxx > > and in the Subject line type > > faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, > click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subjectq or > send a message, to > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > > > __________ Information from ESET NOD32 Antivirus, version of virus signature > database 6448 (20110908) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > > > __________ Information from ESET NOD32 Antivirus, version of virus signature > database 6448 (20110908) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, > click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject�q or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq