[ddots-l] Delta 1010 Control Pannel question
- From: Chris Smart <csmart8@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sat, 20 Oct 2012 15:28:33 -0400
Hi folks.
I'm having a heck of a time enabling direct monitoring of a couple
inputs on my Delta 1010. I have the unit with various connectors on
breakout cables.
I'm trying to enable direct monitoring on Analog 1/2, the pair of
XLR inputs. I've varified that sufficient audio signal is coming
into those inputs in Sonar by setting a track input to Analog 1/2
and enabling input monitoring.
The output side is also fine, simply s/pdif to an external DAC. no
problems there.
But I can't make much sense of the various tabs in the M-audio
Control Pannel.
On the hardware tab, I do a mouse click on the "disable asio direct
monitoring" button, . it toggles between graphic 74 and graphic
348, one of them is presumably on, the other off. But, neither
state seem to sort things out.
Switching to the Mixer tab, I've tried left clicking on the mute
and solo buttons, again with no audible effect.
Does anyone remember how to do this?
There are some times when I want to simply monitor Analog 1/2
without the extra latency of the round trip through Sonar.
thanks for any helpclarification.
I have Skype and of course Jaws Tandom here as well if someone
wants to poke around.
Chris
--------------------------------------------------
CTS MASTERING, affordable and professional mixing and mastering:
http://www.ctsmastering.com
Twitter: https://twitter.com/#!/CTSMASTERING
BLOG: www.ctsmastering.com/blog
Linked In: http://ca.linkedin.com/pub/chris-smart/46/824/536
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
