Hello,
I am using Jaws 16 on Win7 pro.
Regards.
iPhone'umdan gönderildi
BillList1 <billlist1@xxxxxxxxxxx> şunları yazdı (29 May 2017 19:19):
Are you running JAWS 16 or earlier under Windows7 or earlier. Otherwise,PLEASE READ THIS FOOTER AT LEAST ONCE!
CakeTalking will not run reliably.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of floyd white
Sent: Sunday, May 28, 2017 1:45 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: CakeTalking problem, automatically adjust the screen?
You'll need to open a .cwp file first.
Then press f6 once.
It should say 'Please wait'.
Followed by 're-configuring and refreshed ...'
I usually then press control + double f2 to display the peak meter without
all the other meters.
On 5/28/17, Can Kırca <cankirca@xxxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Hello,
When the Sonar starts, CakeTalking says: "Welcome to Sonar 8.5.3.282,
with the CakeTalking 8.8 scripts. Remember, After you are done loading
your project? always press F6.
Now? Please wait until you hear that the screen has settled down.
JAWS Control Surface Ready"
But it didn't do anything to settle down the screen, I'm pressing F6
always to start to use.
How can I fix it? Is it normal?
Thank you.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject q or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
