[softwarelist] Re: Moving a window used by OPro (RISC OS)
- From: Dave Symes <dave@xxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Tue, 08 Jul 2014 14:59:09 +0100
In article <53BBCD07.2020607@xxxxxxxxxxxxxxxxxxx>,
David Pilling <flist@xxxxxxxxxxxxxxxxxxx> wrote:
> Hi Alan,
> On 08/07/2014 11:56, Alan Adams wrote:
> > I do a lot of printing which requires the "print sheet" dialog.
> > However when the print sheet window opens, it doesn't hide the "Print"
> > button on the main print window, which is still open underneath.
> Interesting point. It happens because of the way OP handles its dialogue
> box windows.
> Might be better if it shaded parent windows - i.e. turned off all the
> controls.
> Quick fix - move the print button (using a template editor) so that it
> is under where the print sheet window appears. I've looked and I think
> that is just about possible.
> Print is a fancy dialogue, it expands, and the print button has to move,
> that may make this suggestion useless.
> OK, Plan B, make the print sheet window much bigger.
> David Pilling
> www.davidpilling.com
Or cheat.
The "Print sheet" pane is not attached to the parent print window, so just
drag the "Print sheet" window down over the [Print] button.
Dave
No Templates were harmed during the writing of this post. ;-)
--
Dave Triffid
To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling
Other related posts:
