Re: [cpsig] Timber

  • From: Alan Gilchrist <cprfan@xxxxxxxxxx>
  • To: cpsig@xxxxxxxxxxxxxxx
  • Date: Sun, 04 May 2003 13:32:34 -0400

At 01:47 AM 5/4/2003 +0000, you wrote:

Can anyone shed some light on the demesions of the lumber used to
build trestles on the KVR. I can't quite figure out the bents, caps,

I recall that there is a KVR bridge plan book available from the CPSig that might list lumber sizes, you might also find the sizes listed under CPR standard plans for bridges and trestles as well.

 ____________________________________________________________
/                                                                       &#92;
|   What: Modeling Canadian Pacific in B.C. in the late 50's             |
| Member: NMRA, Region: NFR, Division: WOD                               |
|  EMail: cprfan at rogers dot com                                       |
|    WEB: http://www.pbase.com/cprfan                                    ;|
&#92;____________________________________________________________/



  • References:

Other related posts:

  1. Home
  2. cpha
  3. Archive
  4. 05-2003