Re: [cpsig] Brookmere Roundhouse

  • From: "RR Auer" <kandr@xxxxxxxxx>
  • To: <cpsig@xxxxxxxxxxxxxxx>
  • Date: Mon, 19 May 2003 22:07:24 -0600

Thanks Joe, glad you were available to clear this up.

Regards,
Rainer

----- Original Message -----
From: "KVRailway" <kvrailway@xxxxxxx>
To: <cpsig@xxxxxxxxxxxxxxx>
Sent: Monday, May 19, 2003 7:10 PM
Subject: Re: [cpsig] Brookmere Roundhouse


(This reply posted to BC Interior Group also)  Easy.  The first date of
1947 is incorrect.  The 1947 date is given in Sanford's book "McCulloch's
Wonder."  It is a typo.  Other writers simply quoted the date published in
McCulloch's Wonder.  There were three roundhouse structures at Brookmere.
The first structure was replaced in 1944 by a four stall building.  That 2nd
building was destroyed by the explosion of 907 in 1949.  The third and last
structure had some slight differences from its predecessor.  Records
concerning the dismantling of the Brookmere roundhouse tend to be
contradictory, railway records tending to show the structure gone in 1970
while photographic evidence indicates 1972.

Joe Smuin
  ----- Original Message -----
  From: RR Auer
  To: cpsig@xxxxxxxxxxxxxxx
  Sent: Monday, May 19, 2003 2:18 PM
  Subject: [cpsig] Brookmere Roundhouse


  Although I can't help Brent with his turntable plans search, my
  attempt unearthed a couple of questions for those familiar with
  the pre '47 or pre '49 structure. My confusion comes from photos
  and captions in the BRMNA "Canadian Pacific in the Rockies
  Vol. 6" on page 12 and the BRMNA "Canadian Pacific's Kettle
  Valley Railway" page 28 the former indicates a three stall roundhouse
  destoyed March 21, 1947 and rebuilt with four stalls in 1949. The
  latter indicates a four stall building was destroyed March 21, 1949
  and rebuilt in kind the same year. Both of course from a boiler
  explosion on ten wheeler D10g #907. Furhtermore the former book
  indicates the rebuilt structure lasted till 1970 the latter says 1972.
  BTW, the photos indicate structural differences as well. Any help
  in clearing this up woul be appreciated.





Other related posts: