Not to take an advere stance Keith but I still don't know
which locomotives you refer to. Are they Alco or MLW, FA/B-1,
FA/B-2 (FPA/PB-2) or god forbid an FA/B-4? Let's get some
clarification and see if we can assist.
Rainer Auer
Sakatoon, SK
--- In cpsig@xxxxxxxxxxxxxxx, "Webb Keith" <Keith.Webb@...> wrote:
the
Paul,
Thank you for your guidance. Of course I know about where to get
parts, it's more what parts do I need? What few photos I havefound do
not answer that question, and are quite limiting in showing wherethe
bits go (especially roof detail, which is the detail most seen byus!).
and
So what I could do with is a drawing with the parts required listed
highlighted. Probably a lot of work for someone without anyknowledge -
like me, or a pleasant project for someone 'in the knowledge'. Ifthis
was something that could be made available in the files section, webut I
could all reference it.
MR used to do excellent, similar articles like this in the past,
only ever saw one Canadian loco!
Thanks again
PCM is Precision Craft Models
http://www.precisioncraftmodels.com/store/index.cfm - you must have
heard of them!
Best Regards
Keith