Well, I was at my home FBO of Erie intl which it’s ICAO code is KERI.
It does have a tower.
Will have to try Josh’s recommendations and get back to the group on my
progress.
Hope that answers your question.
Ron
From: Brandon Armstrong
Sent: Friday, June 9, 2017 04:38 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: The only thing I'm getting in PF3 is the ATIS info.
hey ron, stop trying to use pf3 in mode zero, you can’t say request IFR
clearance. you have to go to the clearance frequency and push zero. if your
not getting a clearlance frequency, then your probably at an airport that is
non towered. in that case, go to the FFS frequency which is problably
something like 122.2.
On Jun 9, 2017, at 2:09 PM, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx> wrote:
For those using PF3, I would appreciate it that it be possible for we to
connect via JAWS connect and or via team viewer.
I went into FSX’s settings and turned the voice volume down to zero and I now
am only hearing the atis from PF3 like I’m suppose to.
If this isn’t what you mean by killing off the MSATC, please give me step by
step instructions on what I must do to kill the MSATC.
I do have IYP switched over to radar contact.
I did make sure that
CP mode 2 radio button is checked.
I did and have been using the shortcut keystroke on the desktop to access the
frequencies that I’ll need for Departure and arrival.
But why can I not gain access to the clearance delivery, the ground, the
tower and to anything else?
This is why I would deeply appreciate it if someone could link up with me to
double check my settings so that I may start enjoying PF3 with IYP.
I live on the east coast and I’m in the eastern daylight savings time zone.
I live in the north west corner of the state of Pennsylvania.
So if someone could link up with me via jaws connect since I’m using jaws
that would be great.
Very Thankfully Yours,
Ron who’s still attempting to learn how to use PF3 with IYP and FSX
P.S.
I did listen to Josh’s you tube tutorial and believe I have all of my
settings set correctly.
So, why am I only hearing the atis info?
Very thankfully yours, Ron
Alternate Radar Contact
