Oh boy, Maybe wait until one of us can remote in with nvda and check? I really
don't know what's up here. How odd.
Good luck.
On Jan 16, 2017, at 7:29 PM, Mike Wassel <blindndangerous@xxxxxxxxx> wrote:
Right. Well, if I do that, that's when iyp freezes. Also, I did do the
security thing, so it's all set to everyone and everything is set to full
control.
Mike.
On 1/16/2017 10:09 PM, Sarah Alawami wrote:
I *never* follow that advice. I always perform them when everyone is
boarding when I'm asked to. This way it will be correct and I have more
than enough fuel in case I have to do a go around, or I take off with the
toe truck again. Lol!
On Jan 16, 2017, at 7:07 PM, Mike Wassel <blindndangerous@xxxxxxxxx
<mailto:blindndangerous@xxxxxxxxx>> wrote:
I've followed those instructions, and if I say perform fuel loading
operations at the start of the pre-flight checklist, it will say fuel
loading operations completed. However, if I say afirmative when it asks
should I perform fuel loading operations, that's when it freezes. I'll
double check those instructions again, but iyp informs me that I have an
excessive amount of fuel, and advises that's what I should do, so just
trying to follow it's advice. I'll take a second look at that page.
Thanks Robert.
Mike.
On 1/16/2017 7:58 PM, Robert Cezar wrote:
RE: Now back to figuring out why the fuel loading operations are making
iyp freeze and not putting anything in it's log files
Go to:
http://itsyourplane.com/html/information.asp ;
<http://itsyourplane.com/html/information.asp>
and set up file SHARING and SECURITY.
SPECIFICALLY:
Auto-Fuel Loading
On Mon, Jan 16, 2017 at 4:19 PM, Mike Wassel <blindndangerous@xxxxxxxxx
<mailto:blindndangerous@xxxxxxxxx>> wrote:
Yes, this is what I've done. Slightly annoying, but nothing dealbreaking
to just recreate the plan and flt files. Now back to figuring out why the
fuel loading operations are making iyp freeze and not putting anything in
it's log files, unless all those are are are voice transcriptions. I
can't even see if it's throwing an error because it locks up, and nvda
can't read the window. Going to double check permissions and group
settings again. Pretty sure I followed everything right on the site.
Thanks all for the help.
Mike.
On 1/16/2017 7:07 PM, Zachary Kline wrote:
Mike,
FSUIPC 4 does save flights as you mention. In general, all you need to do
to work around this is to just start a new one, or load one explicitly,
every time.
THere’s nothing tied to specific models of aircraft, it’s all related to
the .flt files, generated via FSUIPC or otherwise.
Best,
Zack.
On Jan 16, 2017, at 4:04 PM, Mike Wassel <blindndangerous@xxxxxxxxx
<mailto:blindndangerous@xxxxxxxxx>> wrote:
No, that can't be right, because I cleared out that folder before
launching it again, and it still knew exactly where I was in the flight.
I believe it's got something to do with fsuipc4, because if I delete
the previous flight entry in the mission list dialogue, and let the
flight continue, it makes a new previous flight entry from that point.
Meaning the endless loop was shorter then before. Scrapping everything
and making a new .pln and .flt files fixed the problem, but I'm pretty
sure it's fsuipc4 that's saving the state and reloading it, even if the
files in the documents folder are removed.
Mike.
On 1/16/2017 6:46 PM, Robert Cezar wrote:
RE: I wonder where it's pulling them from
C:\Users\[YOUR NAME]\Documents\Flight Simulator X Files
On Mon, Jan 16, 2017 at 1:26 PM, Mike Wassel <blindndangerous@xxxxxxxxx
<mailto:blindndangerous@xxxxxxxxx>> wrote:
Interesting, because I deleted all my .flt files from my documents/fsx
folder, so I wonder where it's pulling them from.
In answer to your question, it was the airbus 321, and I was flying
from pa to Toronto.
Mike.
On 1/16/2017 4:13 PM, Robert Cezar wrote:
Hi,
Go to the IYP site... http://www.itsyourplane.com ;
<http://www.itsyourplane.com/>
Click on BLIND PILOTS CLICK HERE
Click on Site Map
Click on Resources
Click on IYP Flight Deck Doc manual
Refer to the section entitled: How to Properly Load a Flight Plan and
a Flight
Start reading from PAGE 12
r
On Mon, Jan 16, 2017 at 1:03 PM, Zachary Kline <zkline@xxxxxxxxxxxxx
<mailto:zkline@xxxxxxxxxxxxx>> wrote:
Mike,
THere’s an FSX concept called a flight, and it sounds like you’re
inadvertently loading a flight file which is putting you in the air.
The only solution, as far as I’m aware, is to manually pick aircraft,
weather, etc, and save a new flight parked at the gate.
Out of interest, what plane were you having trouble with, and where
were you trying to fly?
Best,
Zack.
On Jan 16, 2017, at 1:00 PM, Mike Wassel <blindndangerous@xxxxxxxxx
<mailto:blindndangerous@xxxxxxxxx>> wrote:
Hey all,
I did a flight in an aircraft, but messed it up. Now, if I go to
reload that aircraft, it sets it up to just before I crashed, like
an autosave. How do I delete this so that it will start me at the
hanger, instead of in the air, about to crash. If I click reset
from the flights menu, it just resets to that point. I thought it
was the state.cfg file under %appdata%\microsoft\fsx\simobjects, but
apparently not. Any help would be appreciated. Googling has given
me nothing useful.
Thanks,
Mike.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in the
subject of your message.
