[bvipilots] Re: ATC Help

  • From: Robert Cezar <robert@xxxxxxxxxxxxxxx>
  • To: bvipilots@xxxxxxxxxxxxx
  • Date: Sat, 4 Feb 2017 09:45:20 -0800

Hi James.

Please let me know how you make out.

r

On Fri, Feb 3, 2017 at 10:25 AM, Sarah Alawami <marrie12@xxxxxxxxx> wrote:

Have you tried reinstalling IYP to see if that would help. It's a lot
easier then reinstalling the sim and resetting permissions. Lol! That is a
last resourt by the way.
On Feb 3, 2017, at 9:47 AM, James Howard <coldshadow386@xxxxxxxxx>
wrote:

so I'm having issues with ATC where now its not working at all, it was
working at first, then out of no where it just stopped, no idea why.
I've tried toggling ATC, I've tried turning BVIATC off and back on
again, I've tried telling it to open the ATC window. I've even tried
adjusting the sound settings, raising the voice slider to max, I've
tried resetting everything to defaults, even checked the window focus,
and none of this has helped, I get no response when I do any of the
ATC commands, whether its check local weather, or requesting IFR
clearance, or anything basically. As a last resort I've even told it
to listen to comm 1, to see if that would help, still no go. At this
point, I am at a loss as to what to do, any help would be appreciated.
Thanks.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.

Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.

Other related posts: