I did not, however I didn’t do that in the demo either and it worked just fine,
however stated that a flightplan wasn’t loaded.
I can test creating a flightplan, loading up the Skyhawk and then making a
flightplan just to see if that is indeed the problem, but when I’ve loaded the
demo several times and performed checklists without a flightplan being loaded,
I figured the same process would work to register the addon.
Thanks.
On Dec 23, 2016, at 7:50 PM, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Helllo Joshua,
Did you save and load the flight play and flight pursuant to the
documentation in the Flight Deck Doc?
http://www.itsyourplane.com/IYP-Flight-Deck-Doc-009.pdf ;
<http://www.itsyourplane.com/IYP-Flight-Deck-Doc-009.pdf>
Please advise.
Robert
On Fri, Dec 23, 2016 at 4:48 PM, Joshua Tubbs <orin8722@xxxxxxxxx
<mailto:orin8722@xxxxxxxxx>> wrote:
It worked perfectly with the demo. Now I follow the same exact process and
get the prompt to register from Mike, but instead of the registration
dialogue, Skyhawk engine running in my ears I get:
NO AIRCRAFT HAS BEEN DETECTED
Okay, it appears as though the SIMULATOR is RUNNING.
However, it also appears as though the aircraft is not yet
running. If the programme does not start with the plane
loaded and running, then please refer to the Installation
section of our Website.
Preparing your IYP session
On Dec 23, 2016, at 7:28 PM, Wyatt Rose <wyattarose@xxxxxxxxx
<mailto:wyattarose@xxxxxxxxx>> wrote:
Try running IYP without the simulator running. That's what I had to do.
On 12/23/16, Joshua Tubbs <orin8722@xxxxxxxxx <mailto:orin8722@xxxxxxxxx>>
wrote:
Hi all,Blind and Visually impaired Pilots mailinglist
So I just bought the app, and I have my key, but now there’s a problem.
When
I load the Skyhawk into the simulator as normal, and launch IYP, Mike comes
up saying to enter the registration information, but a message comes up
saying that the aircraft wasn’t detected. What? It worked just fine in the
demo, what gives now?
Is it because Zack told me to delete the INI file that I’m having problems
with this? How do I get it back now, if so?
In any case, I don’t get the user registration dialogue that Mike says
should be there, instead I get that dialogue.
Thanks.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx>
and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx>
and put the word help in the subject of your
message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx>
and put the word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx>
and put the word help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx> and
put the word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx <mailto:bvipilots-request@xxxxxxxxxxxxx> and
put the word help in the subject of your message.
