ron, your problem might be flaws. use NVDA flaws sucks.
On Jun 11, 2017, at 8:04 PM, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx> wrote:
Thanks Josh.
Are you or anyone else getting the following for PF3 ATC?
PF3 is not working, please wait or close this program.
Because I just tried once again to fly from KERI to KMDT and all I could get
was the ATIS.
I told it to go to the clearance, for this situation the clearance is 126.8.
Then I tried the zero on the main keyboard and on the calculator keypad with
the num luck turned on.
The zero would not work for me.
I'm almost ready to go back to msatc.
Josh, is there any way we could connect via jaws connect and or via team
viewer?
That way you could double check my settings.
I have the voice in FSX turned off, and I have cp set to 2. and followed your
tutorial.
But for some weird reason and I wish I knew how it happened, I've only got
the clearance to run for me once.
And that was my flight that was from KERI to KAZO and I had to cancel that
flight because I was going in the wrong direction.
A huge thanks.
Ron
-----Original Message----- From: Joshua Tubbs
Sent: Sunday, June 11, 2017 08:46 PM
To: bvipilots@xxxxxxxxxxxxx
Subject: [bvipilots] Re: If you set a flight plan in PF3, and then connect to
fsx, do you still need to set up a flight plan within in FSX as well?
Yes, Ron, you do. That's an IYP thing.
On 6/11/17, Ron Kolesar <kolesar16417@xxxxxxxxxxxxxx> wrote:
For those using PF3 ATC.Blind and Visually impaired Pilots mailinglist
I Select one of my ga flights within if PF3 ATC, then select connect to fsx.
Do I still need to go into FSX and do a alt L and go down the list of flight
plans and select the same flight plan within FSX?
Or can I simply via the jaws cursor within PF3 ATC, select a fp, then alt l
to load the FP, and then simply Alt C to connect to fsx and then grab the
shortcut from the desktop for my frequencies then fire up IYP?
Many Thanks.
Ron who’s last fly from KERI to KAZO went in the wrong direction.
Then once reloaded wouldn’t fly.
so going to try another test flight later tonight.
Many Thanks.
Ron
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
