The link was given as .asf and not a mistake by me. Windows Media Player plays back .asf with a letter "f". Replay AV 8 does record in .asf WMP streams just for you to know. Pam could ry changing the URL I gave her from .asf to .asx and see if it works better for her. --- Fred Leung <fredleunghk@xxxxxxxxx> wrote: > Hi there, > > The extension should be asx > > Regards, > > Fred Leung (???) > E-mails: fredleung@xxxxxxxxxxx > fredleunghk@xxxxxxxxx > > > ----- Original Message ----- > From: <petrakigianos-giasou@xxxxxxxxx> > To: <blindreplay@xxxxxxxxxxxxx> > Sent: Wednesday, March 07, 2007 9:26 PM > Subject: [blindreplay] Re: KAAM radio > > > > Here you go: > > > > KAAM radio URLs: > > Windows Media Player format > > Have not tried tuning to these URLS. Test yourself. > > http://wmc1.liquidviewer.net/KAAM?MSWMExt=.asf > > > > http://38.116.147.101:80/KAAM?MSWMExt=.asf > > > > If they don't work try changing the .asf in above addresses > to > > .wma at the end of each address you see above. > > > > Another great source is Bill Sparks website: > > > > http://www.billsparks.org > > > > You might want to hear my show on Web Scissors I did at: > > > > http://petrogia.blogspot.com > > > > Petro > > > > > > --- pamdrake <pamdrake@xxxxxxxxxxxxx> wrote: > > > >> Petro > >> > >> Well, I just tried tuning the station again. I did as you > >> suggested, but > >> after pressing the applications key plus t there was > >> Once again silence. I did select windows media player for > >> conversion after > >> recording, but as I heard no sound I doubt there would have > >> been a recording > >> if I had attempted one. > >> > >> The stream shown by the url finder is: > >> http://wmc1.liquidviewer.net/KAAM.smi > >> > >> Now I just tried clicking on the link which appeared in my > own > >> message and > >> got a message saying that Windows Internet Explorer could > not > >> play the file > >> because it was unable to open the url. The url could not > be > >> found. > >> > >> I wish I could take a screen shot of this site when I try > >> loggin in. > >> Unfortunately my keyboard is non-standard and the key which > I > >> believe should > >> be the print screen key causes my computer to shut down! > >> Wouldn't I have to > >> send the screen shot to a sighted person anyway to have it > >> read? > >> > >> I hope someone here can figure out what the problem may be. > >> > >> The actual site to which I go to play the live stream is > >> www.kaamradio.com/ > >> > >> Thanks again. > >> > >> Pam > >> > >> -----Original Message----- > >> From: blindreplay-bounce@xxxxxxxxxxxxx > >> [mailto:blindreplay-bounce@xxxxxxxxxxxxx] On Behalf Of > >> petrakigianos-giasou@xxxxxxxxx > >> Sent: Tuesday, March 06, 2007 3:03 PM > >> To: blindreplay@xxxxxxxxxxxxx > >> Subject: [blindreplay] Re: capture stream or not > >> > >> Pam > >> My guess is you did something wrong. Try this just to be > sure. > >> Go to the listview where your stations are listed in RAV 8. > >> Arrow down to the station and stop there. Now press your > >> applications key. > >> Press "T" for Tune to station. See if the stream works. > >> > >> If the stream works you will hear the audio through your > >> speakers. This is a > >> small test. > >> > >> You will be in a Tuner dialog box with various buttons. > This > >> is for WMP > >> streams. Use your tab key to navigate to these buttons: > >> Stop, Volume slider and so on. You use space bar to > activate > >> one of these > >> buttons in the Tuner dialog box that pops up. I have not > >> touched the mute > >> button. To switch back and forth between RAV 8 and Tuner > >> dialog box use your > >> ALT+TAB keyboard command. To close the Tuner dialog box use > >> ALT+F4 command > >> and you will be back on RAV 8 program. Just letting you > know > >> all this. > >> > >> If you get no audio after doing applications key and "T" > then > >> something is > >> wrong for sure. Many factors: bad URL link, check > properties > >> area to see if > >> you have told it the right media player choice like Windows > >> Media player and > >> so on. > >> > >> Can you send me the actual URL address you were trying to > >> record? > >> > >> Not sure if you know how so I am posting instructions here: > >> > >> Highlight station in listview box. > >> Press Applications key. > >> Choose "P" for Properties for Properties dialog xcreen. > >> Go to Basic tab page. > >> Tab a few times in the Basic page until you hear URL: edit > >> box. > >> Copy the URL address yu have in there. > >> Press escape key to leave without affecting your settings > in > >> properties > >> screen. > >> > >> Post this URL to this list for me and others to test. > >> > >> I tested WMKV today and it is working as you say. No > issues. > >> You are correct > >> with yur analysis. > >> > >> I hope I didn't forget anything. > >> > >> Petro > >> > >> -- > >> To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx > with > >> unsubscribe in subject > >> To contact list owner: e-mail > blindreplay-admins@xxxxxxxxxxxxx > >> > > > > -- > > To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx > with unsubscribe > > in subject > > To contact list owner: e-mail > blindreplay-admins@xxxxxxxxxxxxx > > -- > To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with > unsubscribe in subject > To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx > -- To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx