Lox/kero has bright orange plumage.
On Fri, Jul 3, 2015 at 9:57 AM, John Dom <johndom@xxxxxxxxx> wrote:
Is the orange exhaust due to metal powder remnants combusting or is the 3D
motor wall combusting in oxygen?
jd
-----Original Message-----
From: arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx] On
Behalf Of Aplin Alexander T
Sent: vrijdag 3 juli 2015 15:43
To: arocket@xxxxxxxxxxxxx
Subject: [AR] [UK OFFICIAL] Students Aim for Space with 3D-Printed Rocket
Engine
Classification: UK OFFICIAL
Handling Instruction: DISCLAIMER - this is a personal e-mail and only
represents the views of the sender
http://www.space.com/29808-students-3d-printed-rocket-engine.html
"There was still some sintering powder stuck in the passages after the
3D-print job. We were forced to put the injector in an ultrasonic cleaner
for a few days and were fortunate to see a large amount of [the] powder
leave it!"
Alex Aplin
"This e-mail and any attachment(s) is intended for the recipient only. Its
unauthorised use,
disclosure, storage or copying is not permitted. Communications with Dstl
are monitored and/or recorded for system efficiency and other lawful
purposes, including business intelligence, business metrics and training.
Any views or opinions expressed in this e-mail do not necessarily reflect
Dstl policy."
"If you are not the intended recipient, please remove it from your system
and notify the author of the email and centralenq@xxxxxxxxxxx"