I think they were both drive 0 but one was scsifs and one was adfs.
Sent from my iPhone
On Oct 26, 2015, at 03:18, Chris Johnson <chris@xxxxxxxxxxxxxxxxxxxxx> wrote:---
In article <F4180E88-79D1-485F-ABBC-4832D216C0A9@xxxxxx>,
Chris Chapman <chrisc30@xxxxxx> wrote:
So I have an issue with my ARMini. When I installed RISC OS 5.22 I
did a backup on to a USB drive. It was a regular sized one which
protruded a bit much so I bought a mini one and copied the contents
over no problem. When I took the regular sized one out, RISC OS was
still looking for it and !Configure wouldn't load nor would
!Netsurf. Could it be possible that it was using both the MicroSD
and the USB for booting? At any rate I am going to start with a
fresh !Boot on the MicroSD and try to reconfigure it.
When you say USB drive, are you meaning a 'proper' drive, either SSD
or spinning rust, or are you meaning a pen drive or memory stick?
Are the names of the two drives the same? Some filepaths with the
drive name may have been saved within !Boot, eg choices. It wouldn't
be looking for *both* sdfs and scsi to boot from, *configure
filesystem sets either SDFS or SCSI as the boot file system.
--
Chris Johnson
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
