[argyllcms] Re: colprof parameters
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 27 Jun 2019 09:12:44 +1000
graxx@xxxxxxxxxxxx wrote:
Hello Roger,
I must be doing some silly or really wrong. Or my data is really bad.
I realize the Argyll output profiles only do "GCR" type of gray balancing
where Black starts at zero.
Going to continue reading up the stle, stpo, enpo and enle parameters...
The black parameters are not the easiest to set, because they
interact with the printer characteristics themselves. Some
experimentation using xicclu -g is usually the quickest way
to figure things out, but you do have to have some understanding
of what effect the parameters are having on the black curve, and
what effect changing black has on the other colors.
See <
http://www.argyllcms.com/doc/Scenarios.html#PP6>
Cheers,
Graeme Gill.
Other related posts:
