[argyllcms] Re: chartread <=> spotread
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 21 Sep 2015 09:51:27 +1000
Lars-Daniel Weber wrote:
I've got problems with reading a profile, since it's not printed on a flat
area.
Is it possible to use spotread to read the single values and use the result
for colprof?
You could do this if you really wanted to. Just supply a logfile argument to
spotread, and then you will have to massage it into .ti3 format
by adding the device value references etc., perhaps using a spreadsheet.
Another way would be to use chartread -xl, and then cut and paste
the values in from spotread.
But a simpler way if the chart is in the right order, is simply
to use the chartread -p option.
Graeme Gill.
Other related posts: